src/kpx_cpu/sheepshaver_glue.cpp

/*
 *  sheepshaver_glue.cpp - Glue Kheperix CPU to SheepShaver CPU engine interface
 *
 *  SheepShaver (C) 1997-2002 Christian Bauer and Marc Hellwig
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include "sysdeps.h"
#include "cpu_emulation.h"
#include "main.h"
#include "prefs.h"
#include "xlowmem.h"
#include "emul_op.h"
#include "rom_patches.h"
#include "macos_util.h"
#include "block-alloc.hpp"
#include "sigsegv.h"
#include "spcflags.h"
#include "cpu/ppc/ppc-cpu.hpp"
#include "cpu/ppc/ppc-operations.hpp"

// Used for NativeOp trampolines
#include "video.h"
#include "name_registry.h"
#include "serial.h"

#include <stdio.h>

#if ENABLE_MON
#include "mon.h"
#include "mon_disass.h"
#endif

#define DEBUG 0
#include "debug.h"

static void enter_mon(void)
{
        // Start up mon in real-mode
#if ENABLE_MON
        char *arg[4] = {"mon", "-m", "-r", NULL};
        mon(3, arg);
#endif
}

// Enable multicore (main/interrupts) cpu emulation?
#define MULTICORE_CPU (ASYNC_IRQ ? 1 : 0)

// Enable Execute68k() safety checks?
#define SAFE_EXEC_68K 1

// Save FP state in Execute68k()?
#define SAVE_FP_EXEC_68K 1

// Interrupts in EMUL_OP mode?
#define INTERRUPTS_IN_EMUL_OP_MODE 1

// Interrupts in native mode?
#define INTERRUPTS_IN_NATIVE_MODE 1

// Pointer to Kernel Data
static KernelData * const kernel_data = (KernelData *)KERNEL_DATA_BASE;


/**
 *              PowerPC emulator glue with special 'sheep' opcodes
 **/

struct sheepshaver_exec_return { };

class sheepshaver_cpu
        : public powerpc_cpu
{
        void init_decoder();
        void execute_sheep(uint32 opcode);

public:

        // Constructor
        sheepshaver_cpu();

        // Condition Register accessors
        uint32 get_cr() const           { return cr().get(); }
        void set_cr(uint32 v)           { cr().set(v); }

        // Execution loop
        void execute(uint32 entry, bool enable_cache = false);

        // Execute 68k routine
        void execute_68k(uint32 entry, M68kRegisters *r);

        // Execute ppc routine
        void execute_ppc(uint32 entry);

        // Execute MacOS/PPC code
        uint32 execute_macos_code(uint32 tvect, int nargs, uint32 const *args);

        // Resource manager thunk
        void get_resource(uint32 old_get_resource);

        // Handle MacOS interrupt
        void interrupt(uint32 entry);
        void handle_interrupt();

        // spcflags for interrupts handling
        static uint32 spcflags;

        // Lazy memory allocator (one item at a time)
        void *operator new(size_t size)
                { return allocator_helper< sheepshaver_cpu, lazy_allocator >::allocate(); }
        void operator delete(void *p)
                { allocator_helper< sheepshaver_cpu, lazy_allocator >::deallocate(p); }
        // FIXME: really make surre array allocation fail at link time?
        void *operator new[](size_t);
        void operator delete[](void *p);
};

uint32 sheepshaver_cpu::spcflags = 0;
lazy_allocator< sheepshaver_cpu > allocator_helper< sheepshaver_cpu, lazy_allocator >::allocator;

sheepshaver_cpu::sheepshaver_cpu()
        : powerpc_cpu()
{
        init_decoder();
}

void sheepshaver_cpu::init_decoder()
{
#ifndef PPC_NO_STATIC_II_INDEX_TABLE
        static bool initialized = false;
        if (initialized)
                return;
        initialized = true;
#endif

        static const instr_info_t sheep_ii_table[] = {
                { "sheep",
                  (execute_fn)&sheepshaver_cpu::execute_sheep,
                  NULL,
                  D_form, 6, 0, CFLOW_JUMP | CFLOW_TRAP
                }
        };

        const int ii_count = sizeof(sheep_ii_table)/sizeof(sheep_ii_table[0]);
        D(bug("SheepShaver extra decode table has %d entries\n", ii_count));

        for (int i = 0; i < ii_count; i++) {
                const instr_info_t * ii = &sheep_ii_table[i];
                init_decoder_entry(ii);
        }
}

// Forward declaration for native opcode handler
static void NativeOp(int selector);

/*              NativeOp instruction format:
                +------------+--------------------------+--+----------+------------+
                |      6     |                          |FN|    OP    |      2     |
                +------------+--------------------------+--+----------+------------+
                 0         5 |6                       19 20 21      25 26        31
*/

typedef bit_field< 20, 20 > FN_field;
typedef bit_field< 21, 25 > NATIVE_OP_field;
typedef bit_field< 26, 31 > EMUL_OP_field;

// Execute SheepShaver instruction
void sheepshaver_cpu::execute_sheep(uint32 opcode)
{
//      D(bug("Extended opcode %08x at %08x (68k pc %08x)\n", opcode, pc(), gpr(24)));
        assert((((opcode >> 26) & 0x3f) == 6) && OP_MAX <= 64 + 3);

        switch (opcode & 0x3f) {
        case 0:         // EMUL_RETURN
                QuitEmulator();
                break;

        case 1:         // EXEC_RETURN
                throw sheepshaver_exec_return();
                break;

        case 2:         // EXEC_NATIVE
                NativeOp(NATIVE_OP_field::extract(opcode));
                if (FN_field::test(opcode))
                        pc() = lr();
                else
                        pc() += 4;
                break;

        default: {      // EMUL_OP
                M68kRegisters r68;
                WriteMacInt32(XLM_68K_R25, gpr(25));
                WriteMacInt32(XLM_RUN_MODE, MODE_EMUL_OP);
                for (int i = 0; i < 8; i++)
                        r68.d[i] = gpr(8 + i);
                for (int i = 0; i < 7; i++)
                        r68.a[i] = gpr(16 + i);
                r68.a[7] = gpr(1);
                EmulOp(&r68, gpr(24), EMUL_OP_field::extract(opcode) - 3);
                for (int i = 0; i < 8; i++)
                        gpr(8 + i) = r68.d[i];
                for (int i = 0; i < 7; i++)
                        gpr(16 + i) = r68.a[i];
                gpr(1) = r68.a[7];
                WriteMacInt32(XLM_RUN_MODE, MODE_68K);
                pc() += 4;
                break;
        }
        }
}

// Execution loop
void sheepshaver_cpu::execute(uint32 entry, bool enable_cache)
{
        try {
                powerpc_cpu::execute(entry, enable_cache);
        }
        catch (sheepshaver_exec_return const &) {
                // Nothing, simply return
        }
        catch (...) {
                printf("ERROR: execute() received an unknown exception!\n");
                QuitEmulator();
        }
}

// Handle MacOS interrupt
void sheepshaver_cpu::interrupt(uint32 entry)
{
#if !MULTICORE_CPU
        // Save program counters and branch registers
        uint32 saved_pc = pc();
        uint32 saved_lr = lr();
        uint32 saved_ctr= ctr();
        uint32 saved_sp = gpr(1);
#endif

        // Initialize stack pointer to SheepShaver alternate stack base
        gpr(1) = SheepStack1Base - 64;

        // Build trampoline to return from interrupt
        uint32 trampoline[] = { htonl(POWERPC_EMUL_OP | 1) };

        // Prepare registers for nanokernel interrupt routine
        kernel_data->v[0x004 >> 2] = htonl(gpr(1));
        kernel_data->v[0x018 >> 2] = htonl(gpr(6));

        gpr(6) = ntohl(kernel_data->v[0x65c >> 2]);
        assert(gpr(6) != 0);
        WriteMacInt32(gpr(6) + 0x13c, gpr(7));
        WriteMacInt32(gpr(6) + 0x144, gpr(8));
        WriteMacInt32(gpr(6) + 0x14c, gpr(9));
        WriteMacInt32(gpr(6) + 0x154, gpr(10));
        WriteMacInt32(gpr(6) + 0x15c, gpr(11));
        WriteMacInt32(gpr(6) + 0x164, gpr(12));
        WriteMacInt32(gpr(6) + 0x16c, gpr(13));

        gpr(1)  = KernelDataAddr;
        gpr(7)  = ntohl(kernel_data->v[0x660 >> 2]);
        gpr(8)  = 0;
        gpr(10) = (uint32)trampoline;
        gpr(12) = (uint32)trampoline;
        gpr(13) = get_cr();

        // rlwimi. r7,r7,8,0,0
        uint32 result = op_ppc_rlwimi::apply(gpr(7), 8, 0x80000000, gpr(7));
        record_cr0(result);
        gpr(7) = result;

        gpr(11) = 0xf072; // MSR (SRR1)
        cr().set((gpr(11) & 0x0fff0000) | (get_cr() & ~0x0fff0000));

        // Enter nanokernel
        execute(entry);

#if !MULTICORE_CPU
        // Restore program counters and branch registers
        pc() = saved_pc;
        lr() = saved_lr;
        ctr()= saved_ctr;
        gpr(1) = saved_sp;
#endif
}

// Execute 68k routine
void sheepshaver_cpu::execute_68k(uint32 entry, M68kRegisters *r)
{
#if SAFE_EXEC_68K
        if (ReadMacInt32(XLM_RUN_MODE) != MODE_EMUL_OP)
                printf("FATAL: Execute68k() not called from EMUL_OP mode\n");
#endif

        // Save program counters and branch registers
        uint32 saved_pc = pc();
        uint32 saved_lr = lr();
        uint32 saved_ctr= ctr();
        uint32 saved_cr = get_cr();

        // Create MacOS stack frame
        // FIXME: make sure MacOS doesn't expect PPC registers to live on top
        uint32 sp = gpr(1);
        gpr(1) -= 56;
        WriteMacInt32(gpr(1), sp);

        // Save PowerPC registers
        uint32 saved_GPRs[19];
        memcpy(&saved_GPRs[0], &gpr(13), sizeof(uint32)*(32-13));
#if SAVE_FP_EXEC_68K
        double saved_FPRs[18];
        memcpy(&saved_FPRs[0], &fpr(14), sizeof(double)*(32-14));
#endif

        // Setup registers for 68k emulator
        cr().set(CR_SO_field<2>::mask());                       // Supervisor mode
        for (int i = 0; i < 8; i++)                                     // d[0]..d[7]
          gpr(8 + i) = r->d[i];
        for (int i = 0; i < 7; i++)                                     // a[0]..a[6]
          gpr(16 + i) = r->a[i];
        gpr(23) = 0;
        gpr(24) = entry;
        gpr(25) = ReadMacInt32(XLM_68K_R25);            // MSB of SR
        gpr(26) = 0;
        gpr(28) = 0;                                                            // VBR
        gpr(29) = ntohl(kernel_data->ed.v[0x74 >> 2]);          // Pointer to opcode table
        gpr(30) = ntohl(kernel_data->ed.v[0x78 >> 2]);          // Address of emulator
        gpr(31) = KernelDataAddr + 0x1000;

        // Push return address (points to EXEC_RETURN opcode) on stack
        gpr(1) -= 4;
        WriteMacInt32(gpr(1), XLM_EXEC_RETURN_OPCODE);
        
        // Rentering 68k emulator
        WriteMacInt32(XLM_RUN_MODE, MODE_68K);

        // Set r0 to 0 for 68k emulator
        gpr(0) = 0;

        // Execute 68k opcode
        uint32 opcode = ReadMacInt16(gpr(24));
        gpr(27) = (int32)(int16)ReadMacInt16(gpr(24) += 2);
        gpr(29) += opcode * 8;
        execute(gpr(29));

        // Save r25 (contains current 68k interrupt level)
        WriteMacInt32(XLM_68K_R25, gpr(25));

        // Reentering EMUL_OP mode
        WriteMacInt32(XLM_RUN_MODE, MODE_EMUL_OP);

        // Save 68k registers
        for (int i = 0; i < 8; i++)                                     // d[0]..d[7]
          r->d[i] = gpr(8 + i);
        for (int i = 0; i < 7; i++)                                     // a[0]..a[6]
          r->a[i] = gpr(16 + i);

        // Restore PowerPC registers
        memcpy(&gpr(13), &saved_GPRs[0], sizeof(uint32)*(32-13));
#if SAVE_FP_EXEC_68K
        memcpy(&fpr(14), &saved_FPRs[0], sizeof(double)*(32-14));
#endif

        // Cleanup stack
        gpr(1) += 56;

        // Restore program counters and branch registers
        pc() = saved_pc;
        lr() = saved_lr;
        ctr()= saved_ctr;
        set_cr(saved_cr);
}

// Call MacOS PPC code
uint32 sheepshaver_cpu::execute_macos_code(uint32 tvect, int nargs, uint32 const *args)
{
        // Save program counters and branch registers
        uint32 saved_pc = pc();
        uint32 saved_lr = lr();
        uint32 saved_ctr= ctr();

        // Build trampoline with EXEC_RETURN
        uint32 trampoline[] = { htonl(POWERPC_EMUL_OP | 1) };
        lr() = (uint32)trampoline;

        gpr(1) -= 64;                                                           // Create stack frame
        uint32 proc = ReadMacInt32(tvect);                      // Get routine address
        uint32 toc = ReadMacInt32(tvect + 4);           // Get TOC pointer

        // Save PowerPC registers
        uint32 regs[8];
        regs[0] = gpr(2);
        for (int i = 0; i < nargs; i++)
                regs[i + 1] = gpr(i + 3);

        // Prepare and call MacOS routine
        gpr(2) = toc;
        for (int i = 0; i < nargs; i++)
                gpr(i + 3) = args[i];
        execute(proc);
        uint32 retval = gpr(3);

        // Restore PowerPC registers
        for (int i = 0; i <= nargs; i++)
                gpr(i + 2) = regs[i];

        // Cleanup stack
        gpr(1) += 64;

        // Restore program counters and branch registers
        pc() = saved_pc;
        lr() = saved_lr;
        ctr()= saved_ctr;

        return retval;
}

// Execute ppc routine
inline void sheepshaver_cpu::execute_ppc(uint32 entry)
{
        // Save branch registers
        uint32 saved_lr = lr();

        const uint32 trampoline[] = { htonl(POWERPC_EMUL_OP | 1) };
        lr() = (uint32)trampoline;

        execute(entry);

        // Restore branch registers
        lr() = saved_lr;
}

// Resource Manager thunk
extern "C" void check_load_invoc(uint32 type, int16 id, uint32 h);

inline void sheepshaver_cpu::get_resource(uint32 old_get_resource)
{
        uint32 type = gpr(3);
        int16 id = gpr(4);

        // Create stack frame
        gpr(1) -= 56;

        // Call old routine
        execute_ppc(old_get_resource);

        // Call CheckLoad()
        uint32 handle = gpr(3);
        check_load_invoc(type, id, handle);
        gpr(3) = handle;

        // Cleanup stack
        gpr(1) += 56;
}


/**
 *              SheepShaver CPU engine interface
 **/

static sheepshaver_cpu *main_cpu = NULL;                // CPU emulator to handle usual control flow
static sheepshaver_cpu *interrupt_cpu = NULL;   // CPU emulator to handle interrupts
static sheepshaver_cpu *current_cpu = NULL;             // Current CPU emulator context

void FlushCodeCache(uintptr start, uintptr end)
{
        D(bug("FlushCodeCache(%08x, %08x)\n", start, end));
        main_cpu->invalidate_cache_range(start, end);
#if MULTICORE_CPU
        interrupt_cpu->invalidate_cache_range(start, end);
#endif
}

static inline void cpu_push(sheepshaver_cpu *new_cpu)
{
#if MULTICORE_CPU
        current_cpu = new_cpu;
#endif
}

static inline void cpu_pop()
{
#if MULTICORE_CPU
        current_cpu = main_cpu;
#endif
}

// Dump PPC registers
static void dump_registers(void)
{
        current_cpu->dump_registers();
}

// Dump log
static void dump_log(void)
{
        current_cpu->dump_log();
}

/*
 *  Initialize CPU emulation
 */

static sigsegv_return_t sigsegv_handler(sigsegv_address_t fault_address, sigsegv_address_t fault_instruction)
{
#if ENABLE_VOSF
        // Handle screen fault
        extern bool Screen_fault_handler(sigsegv_address_t, sigsegv_address_t);
        if (Screen_fault_handler(fault_address, fault_instruction))
                return SIGSEGV_RETURN_SUCCESS;
#endif

        const uintptr addr = (uintptr)fault_address;
#if HAVE_SIGSEGV_SKIP_INSTRUCTION
        // Ignore writes to ROM
        if ((addr - ROM_BASE) < ROM_SIZE)
                return SIGSEGV_RETURN_SKIP_INSTRUCTION;

        // Ignore all other faults, if requested
        if (PrefsFindBool("ignoresegv"))
                return SIGSEGV_RETURN_FAILURE;
#else
#error "FIXME: You don't have the capability to skip instruction within signal handlers"
#endif

        printf("SIGSEGV\n");
        printf("  pc %p\n", fault_instruction);
        printf("  ea %p\n", fault_address);
        printf(" cpu %s\n", current_cpu == main_cpu ? "main" : "interrupts");
        dump_registers();
        current_cpu->dump_log();
        enter_mon();
        QuitEmulator();

        return SIGSEGV_RETURN_FAILURE;
}

void init_emul_ppc(void)
{
        // Initialize main CPU emulator
        main_cpu = new sheepshaver_cpu();
        main_cpu->set_register(powerpc_registers::GPR(3), any_register((uint32)ROM_BASE + 0x30d000));
        WriteMacInt32(XLM_RUN_MODE, MODE_68K);

#if MULTICORE_CPU
        // Initialize alternate CPU emulator to handle interrupts
        interrupt_cpu = new sheepshaver_cpu();
#endif

        // Install the handler for SIGSEGV
        sigsegv_install_handler(sigsegv_handler);

#if ENABLE_MON
        // Install "regs" command in cxmon
        mon_add_command("regs", dump_registers, "regs                     Dump PowerPC registers\n");
        mon_add_command("log", dump_log, "log                      Dump PowerPC emulation log\n");
#endif
}

/*
 *  Emulation loop
 */

void emul_ppc(uint32 entry)
{
        current_cpu = main_cpu;
#if DEBUG
        current_cpu->start_log();
#endif
        // start emulation loop and enable code translation or caching
        current_cpu->execute(entry, true);
}

/*
 *  Handle PowerPC interrupt
 */

#if !ASYNC_IRQ
void TriggerInterrupt(void)
{
#if 0
  WriteMacInt32(0x16a, ReadMacInt32(0x16a) + 1);
#else
  // Trigger interrupt to main cpu only
  if (main_cpu)
          main_cpu->trigger_interrupt();
#endif
}
#endif

void sheepshaver_cpu::handle_interrupt(void)
{
        // Do nothing if interrupts are disabled
        if (int32(ReadMacInt32(XLM_IRQ_NEST)) > 0)
                return;

        // Do nothing if there is no interrupt pending
        if (InterruptFlags == 0)
                return;

        // Disable MacOS stack sniffer
        WriteMacInt32(0x110, 0);

        // Interrupt action depends on current run mode
        switch (ReadMacInt32(XLM_RUN_MODE)) {
        case MODE_68K:
                // 68k emulator active, trigger 68k interrupt level 1
                assert(current_cpu == main_cpu);
                WriteMacInt16(tswap32(kernel_data->v[0x67c >> 2]), 1);
                set_cr(get_cr() | tswap32(kernel_data->v[0x674 >> 2]));
                break;
    
#if INTERRUPTS_IN_NATIVE_MODE
        case MODE_NATIVE:
                // 68k emulator inactive, in nanokernel?
                assert(current_cpu == main_cpu);
                if (gpr(1) != KernelDataAddr) {
                        // Prepare for 68k interrupt level 1
                        WriteMacInt16(tswap32(kernel_data->v[0x67c >> 2]), 1);
                        WriteMacInt32(tswap32(kernel_data->v[0x658 >> 2]) + 0xdc,
                                                  ReadMacInt32(tswap32(kernel_data->v[0x658 >> 2]) + 0xdc)
                                                  | tswap32(kernel_data->v[0x674 >> 2]));
      
                        // Execute nanokernel interrupt routine (this will activate the 68k emulator)
                        DisableInterrupt();
                        cpu_push(interrupt_cpu);
                        if (ROMType == ROMTYPE_NEWWORLD)
                                current_cpu->interrupt(ROM_BASE + 0x312b1c);
                        else
                                current_cpu->interrupt(ROM_BASE + 0x312a3c);
                        cpu_pop();
                }
                break;
#endif
    
#if INTERRUPTS_IN_EMUL_OP_MODE
        case MODE_EMUL_OP:
                // 68k emulator active, within EMUL_OP routine, execute 68k interrupt routine directly when interrupt level is 0
                if ((ReadMacInt32(XLM_68K_R25) & 7) == 0) {
#if 1
                        // Execute full 68k interrupt routine
                        M68kRegisters r;
                        uint32 old_r25 = ReadMacInt32(XLM_68K_R25);     // Save interrupt level
                        WriteMacInt32(XLM_68K_R25, 0x21);                       // Execute with interrupt level 1
                        static const uint8 proc[] = {
                                0x3f, 0x3c, 0x00, 0x00,                 // move.w       #$0000,-(sp)    (fake format word)
                                0x48, 0x7a, 0x00, 0x0a,                 // pea          @1(pc)                  (return address)
                                0x40, 0xe7,                                             // move         sr,-(sp)                (saved SR)
                                0x20, 0x78, 0x00, 0x064,                // move.l       $64,a0
                                0x4e, 0xd0,                                             // jmp          (a0)
                                M68K_RTS >> 8, M68K_RTS & 0xff  // @1
                        };
                        Execute68k((uint32)proc, &r);
                        WriteMacInt32(XLM_68K_R25, old_r25);            // Restore interrupt level
#else
                        // Only update cursor
                        if (HasMacStarted()) {
                                if (InterruptFlags & INTFLAG_VIA) {
                                        ClearInterruptFlag(INTFLAG_VIA);
                                        ADBInterrupt();
                                        ExecutePPC(VideoVBL);
                                }
                        }
#endif
                }
                break;
#endif
        }
}

/*
 *  Execute NATIVE_OP opcode (called by PowerPC emulator)
 */

#define POWERPC_NATIVE_OP_INIT(LR, OP) \
                tswap32(POWERPC_EMUL_OP | ((LR) << 11) | (((uint32)OP) << 6) | 2)

// FIXME: Make sure 32-bit relocations are used
const uint32 NativeOpTable[NATIVE_OP_MAX] = {
        POWERPC_NATIVE_OP_INIT(1, NATIVE_PATCH_NAME_REGISTRY),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_VIDEO_INSTALL_ACCEL),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_VIDEO_VBL),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_VIDEO_DO_DRIVER_IO),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_IRQ),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_INIT),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_TERM),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_OPEN),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_CLOSE),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_WPUT),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_ETHER_RSRV),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_NOTHING),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_OPEN),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_PRIME_IN),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_PRIME_OUT),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_CONTROL),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_STATUS),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_SERIAL_CLOSE),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_RESOURCE),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_1_RESOURCE),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_IND_RESOURCE),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_GET_1_IND_RESOURCE),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_R_GET_RESOURCE),
        POWERPC_NATIVE_OP_INIT(0, NATIVE_DISABLE_INTERRUPT),
        POWERPC_NATIVE_OP_INIT(0, NATIVE_ENABLE_INTERRUPT),
        POWERPC_NATIVE_OP_INIT(1, NATIVE_MAKE_EXECUTABLE),
};

static void get_resource(void);
static void get_1_resource(void);
static void get_ind_resource(void);
static void get_1_ind_resource(void);
static void r_get_resource(void);

#define GPR(REG) current_cpu->gpr(REG)

static void NativeOp(int selector)
{
        switch (selector) {
        case NATIVE_PATCH_NAME_REGISTRY:
                DoPatchNameRegistry();
                break;
        case NATIVE_VIDEO_INSTALL_ACCEL:
                VideoInstallAccel();
                break;
        case NATIVE_VIDEO_VBL:
                VideoVBL();
                break;
        case NATIVE_VIDEO_DO_DRIVER_IO:
                GPR(3) = (int32)(int16)VideoDoDriverIO((void *)GPR(3), (void *)GPR(4),
                                                                                           (void *)GPR(5), GPR(6), GPR(7));
                break;
        case NATIVE_GET_RESOURCE:
                get_resource();
                break;
        case NATIVE_GET_1_RESOURCE:
                get_1_resource();
                break;
        case NATIVE_GET_IND_RESOURCE:
                get_ind_resource();
                break;
        case NATIVE_GET_1_IND_RESOURCE:
                get_1_ind_resource();
                break;
        case NATIVE_R_GET_RESOURCE:
                r_get_resource();
                break;
        case NATIVE_SERIAL_NOTHING:
        case NATIVE_SERIAL_OPEN:
        case NATIVE_SERIAL_PRIME_IN:
        case NATIVE_SERIAL_PRIME_OUT:
        case NATIVE_SERIAL_CONTROL:
        case NATIVE_SERIAL_STATUS:
        case NATIVE_SERIAL_CLOSE: {
                typedef int16 (*SerialCallback)(uint32, uint32);
                static const SerialCallback serial_callbacks[] = {
                        SerialNothing,
                        SerialOpen,
                        SerialPrimeIn,
                        SerialPrimeOut,
                        SerialControl,
                        SerialStatus,
                        SerialClose
                };
                GPR(3) = serial_callbacks[selector - NATIVE_SERIAL_NOTHING](GPR(3), GPR(4));
                break;
        }
        case NATIVE_DISABLE_INTERRUPT:
                DisableInterrupt();
                break;
        case NATIVE_ENABLE_INTERRUPT:
                EnableInterrupt();
                break;
        case NATIVE_MAKE_EXECUTABLE:
                MakeExecutable(0, (void *)GPR(4), GPR(5));
                break;
        default:
                printf("FATAL: NATIVE_OP called with bogus selector %d\n", selector);
                QuitEmulator();
                break;
        }
}

/*
 *  Execute native subroutine (LR must contain return address)
 */

void ExecuteNative(int selector)
{
        uint32 tvect[2];
        tvect[0] = tswap32(POWERPC_NATIVE_OP_FUNC(selector));
        tvect[1] = 0; // Fake TVECT
        RoutineDescriptor desc = BUILD_PPC_ROUTINE_DESCRIPTOR(0, tvect);
        M68kRegisters r;
        Execute68k((uint32)&desc, &r);
}

/*
 *  Execute 68k subroutine (must be ended with EXEC_RETURN)
 *  This must only be called by the emul_thread when in EMUL_OP mode
 *  r->a[7] is unused, the routine runs on the caller's stack
 */

void Execute68k(uint32 pc, M68kRegisters *r)
{
        current_cpu->execute_68k(pc, r);
}

/*
 *  Execute 68k A-Trap from EMUL_OP routine
 *  r->a[7] is unused, the routine runs on the caller's stack
 */

void Execute68kTrap(uint16 trap, M68kRegisters *r)
{
        uint16 proc[2];
        proc[0] = htons(trap);
        proc[1] = htons(M68K_RTS);
        Execute68k((uint32)proc, r);
}

/*
 *  Call MacOS PPC code
 */

uint32 call_macos(uint32 tvect)
{
        return current_cpu->execute_macos_code(tvect, 0, NULL);
}

uint32 call_macos1(uint32 tvect, uint32 arg1)
{
        const uint32 args[] = { arg1 };
        return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
}

uint32 call_macos2(uint32 tvect, uint32 arg1, uint32 arg2)
{
        const uint32 args[] = { arg1, arg2 };
        return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
}

uint32 call_macos3(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3)
{
        const uint32 args[] = { arg1, arg2, arg3 };
        return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
}

uint32 call_macos4(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4)
{
        const uint32 args[] = { arg1, arg2, arg3, arg4 };
        return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
}

uint32 call_macos5(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5)
{
        const uint32 args[] = { arg1, arg2, arg3, arg4, arg5 };
        return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
}

uint32 call_macos6(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5, uint32 arg6)
{
        const uint32 args[] = { arg1, arg2, arg3, arg4, arg5, arg6 };
        return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
}

uint32 call_macos7(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5, uint32 arg6, uint32 arg7)
{
        const uint32 args[] = { arg1, arg2, arg3, arg4, arg5, arg6, arg7 };
        return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
}

/*
 *  Resource Manager thunks
 */

void get_resource(void)
{
        current_cpu->get_resource(ReadMacInt32(XLM_GET_RESOURCE));
}

void get_1_resource(void)
{
        current_cpu->get_resource(ReadMacInt32(XLM_GET_1_RESOURCE));
}

void get_ind_resource(void)
{
        current_cpu->get_resource(ReadMacInt32(XLM_GET_IND_RESOURCE));
}

void get_1_ind_resource(void)
{
        current_cpu->get_resource(ReadMacInt32(XLM_GET_1_IND_RESOURCE));
}

void r_get_resource(void)
{
        current_cpu->get_resource(ReadMacInt32(XLM_R_GET_RESOURCE));
}
Revision:	1.10
Committed:	2003-10-26T13:59:03Z (21 years, 1 month ago) by gbeauche
Branch:	MAIN
Changes since 1.9:	+23 -39 lines
Log Message:	Rewrite interrupts handling code so that the emulator can work with a predecode cache. This implies to run in interpreted mode only while processing EmulOps or other native (nested) runs. Note that the FLIGHT_RECORDER with a predecode cache gets slower than without caching at all.