[ViewVC] Diff of: cebix/SheepShaver/src/kpx_cpu/sheepshaver

Comparing SheepShaver/src/kpx_cpu/sheepshaver_glue.cpp (file contents):
Revision 1.32 by gbeauche, 2004-04-18T23:03:53Z vs.
Revision 1.64 by gbeauche, 2005-06-30T10:17:58Z

#	Line 1 \| Line 1
1		/*
2		* sheepshaver_glue.cpp - Glue Kheperix CPU to SheepShaver CPU engine interface
3		*
4	<	* SheepShaver (C) 1997-2004 Christian Bauer and Marc Hellwig
4	>	* SheepShaver (C) 1997-2005 Christian Bauer and Marc Hellwig
5		*
6		* This program is free software; you can redistribute it and/or modify
7		* it under the terms of the GNU General Public License as published by
#	Line 38 \| Line 38
38		#include "name_registry.h"
39		#include "serial.h"
40		#include "ether.h"
41	+	#include "timer.h"
42
43		#include <stdio.h>
44		#include <stdlib.h>
45	+	#ifdef HAVE_MALLOC_H
46	+	#include <malloc.h>
47	+	#endif
48	+
49	+	#ifdef USE_SDL_VIDEO
50	+	#include <SDL_events.h>
51	+	#endif
52
53		#if ENABLE_MON
54		#include "mon.h"
#	Line 51 \| Line 59
59		#include "debug.h"
60
61		// Emulation time statistics
62	<	#define EMUL_TIME_STATS 1
62	>	#ifndef EMUL_TIME_STATS
63	>	#define EMUL_TIME_STATS 0
64	>	#endif
65
66		#if EMUL_TIME_STATS
67		static clock_t emul_start_time;
68	<	static uint32 interrupt_count = 0;
68	>	static uint32 interrupt_count = 0, ppc_interrupt_count = 0;
69		static clock_t interrupt_time = 0;
70		static uint32 exec68k_count = 0;
71		static clock_t exec68k_time = 0;
#	Line 83 \| Line 93 \| extern "C" void check_load_invoc(uint32
93		// PowerPC EmulOp to exit from emulation looop
94		const uint32 POWERPC_EXEC_RETURN = POWERPC_EMUL_OP \| 1;
95
86	–	// Enable multicore (main/interrupts) cpu emulation?
87	–	#define MULTICORE_CPU (ASYNC_IRQ ? 1 : 0)
88	–
96		// Enable Execute68k() safety checks?
97		#define SAFE_EXEC_68K 1
98
#	Line 99 \| Line 106 \| const uint32 POWERPC_EXEC_RETURN = POWER
106		#define INTERRUPTS_IN_NATIVE_MODE 1
107
108		// Pointer to Kernel Data
109	<	static KernelData * const kernel_data = (KernelData *)KERNEL_DATA_BASE;
109	>	static KernelData * kernel_data;
110
111		// SIGSEGV handler
112	<	static sigsegv_return_t sigsegv_handler(sigsegv_address_t, sigsegv_address_t);
112	>	sigsegv_return_t sigsegv_handler(sigsegv_address_t, sigsegv_address_t);
113	>
114	>	#if PPC_ENABLE_JIT && PPC_REENTRANT_JIT
115	>	// Special trampolines for EmulOp and NativeOp
116	>	static uint8 *emul_op_trampoline;
117	>	static uint8 *native_op_trampoline;
118	>	#endif
119
120		// JIT Compiler enabled?
121		static inline bool enable_jit_p()
#	Line 137 \| Line 150 \| public:
150		uint32 get_xer() const { return xer().get(); }
151		void set_xer(uint32 v) { xer().set(v); }
152
153	+	// Execute NATIVE_OP routine
154	+	void execute_native_op(uint32 native_op);
155	+
156		// Execute EMUL_OP routine
157		void execute_emul_op(uint32 emul_op);
158
#	Line 149 \| Line 165 \| public:
165		// Execute MacOS/PPC code
166		uint32 execute_macos_code(uint32 tvect, int nargs, uint32 const *args);
167
168	+	#if PPC_ENABLE_JIT
169		// Compile one instruction
170	<	virtual bool compile1(codegen_context_t & cg_context);
171	<
170	>	virtual int compile1(codegen_context_t & cg_context);
171	>	#endif
172		// Resource manager thunk
173		void get_resource(uint32 old_get_resource);
174
175		// Handle MacOS interrupt
176		void interrupt(uint32 entry);
160	–	void handle_interrupt();
177
178		// Make sure the SIGSEGV handler can access CPU registers
179		friend sigsegv_return_t sigsegv_handler(sigsegv_address_t, sigsegv_address_t);
164	–	};
180
181	<	// Memory allocator returning areas aligned on 16-byte boundaries
182	<	void *operator new(size_t size)
183	<	{
184	<	void *p;
181	>	// Memory allocator returning areas aligned on 16-byte boundaries
182	>	void *operator new(size_t size);
183	>	void operator delete(void *p);
184	>	};
185
186	<	#if defined(HAVE_POSIX_MEMALIGN)
187	<	if (posix_memalign(&p, 16, size) != 0)
186	>	// Memory allocator returning sheepshaver_cpu objects aligned on 16-byte boundaries
187	>	// FORMAT: [ alignment ] magic identifier, offset to malloc'ed data, sheepshaver_cpu data
188	>	void *sheepshaver_cpu::operator new(size_t size)
189	>	{
190	>	const int ALIGN = 16;
191	>
192	>	// Allocate enough space for sheepshaver_cpu data + signature + align pad
193	>	uint8 ptr = (uint8 )malloc(size + ALIGN * 2);
194	>	if (ptr == NULL)
195		throw std::bad_alloc();
174	–	#elif defined(HAVE_MEMALIGN)
175	–	p = memalign(16, size);
176	–	#elif defined(HAVE_VALLOC)
177	–	p = valloc(size); // page-aligned!
178	–	#else
179	–	/* XXX: handle padding ourselves */
180	–	p = malloc(size);
181	–	#endif
196
197	<	return p;
197	>	// Align memory
198	>	int ofs = 0;
199	>	while ((((uintptr)ptr) % ALIGN) != 0)
200	>	ofs++, ptr++;
201	>
202	>	// Insert signature and offset
203	>	struct aligned_block_t {
204	>	uint32 pad[(ALIGN - 8) / 4];
205	>	uint32 signature;
206	>	uint32 offset;
207	>	uint8 data[sizeof(sheepshaver_cpu)];
208	>	};
209	>	aligned_block_t blk = (aligned_block_t )ptr;
210	>	blk->signature = FOURCC('S','C','P','U');
211	>	blk->offset = ofs + (&blk->data[0] - (uint8 *)blk);
212	>	assert((((uintptr)&blk->data) % ALIGN) == 0);
213	>	return &blk->data[0];
214		}
215
216	<	void operator delete(void *p)
217	<	{
218	<	#if defined(HAVE_MEMALIGN) \|\| defined(HAVE_VALLOC)
219	<	#if defined(__GLIBC__)
220	<	// this is known to work only with GNU libc
221	<	free(p);
192	<	#endif
193	<	#else
194	<	free(p);
195	<	#endif
216	>	void sheepshaver_cpu::operator delete(void *p)
217	>	{
218	>	uint32 blk = (uint32 )p;
219	>	assert(blk[-2] == FOURCC('S','C','P','U'));
220	>	void ptr = (void )(((uintptr)p) - blk[-1]);
221	>	free(ptr);
222		}
223
224		sheepshaver_cpu::sheepshaver_cpu()
#	Line 221 \| Line 247 \| void sheepshaver_cpu::init_decoder()
247		}
248		}
249
224	–	// Forward declaration for native opcode handler
225	–	static void NativeOp(int selector);
226	–
250		/* NativeOp instruction format:
251	<	+------------+--------------------------+--+----------+------------+
252	<	\| 6 \| \|FN\| OP \| 2 \|
253	<	+------------+--------------------------+--+----------+------------+
254	<	0 5 \|6 19 20 21 25 26 31
251	>	+------------+-------------------------+--+-----------+------------+
252	>	\| 6 \| \|FN\| OP \| 2 \|
253	>	+------------+-------------------------+--+-----------+------------+
254	>	0 5 \|6 18 19 20 25 26 31
255		*/
256
257	<	typedef bit_field< 20, 20 > FN_field;
258	<	typedef bit_field< 21, 25 > NATIVE_OP_field;
257	>	typedef bit_field< 19, 19 > FN_field;
258	>	typedef bit_field< 20, 25 > NATIVE_OP_field;
259		typedef bit_field< 26, 31 > EMUL_OP_field;
260
261		// Execute EMUL_OP routine
#	Line 246 \| Line 269 \| void sheepshaver_cpu::execute_emul_op(ui
269		for (int i = 0; i < 7; i++)
270		r68.a[i] = gpr(16 + i);
271		r68.a[7] = gpr(1);
272	<	uint32 saved_cr = get_cr() & CR_field<2>::mask();
272	>	uint32 saved_cr = get_cr() & 0xff9fffff; // mask_operand::compute(11, 8)
273		uint32 saved_xer = get_xer();
274		EmulOp(&r68, gpr(24), emul_op);
275		set_cr(saved_cr);
#	Line 275 \| Line 298 \| void sheepshaver_cpu::execute_sheep(uint
298		break;
299
300		case 2: // EXEC_NATIVE
301	<	NativeOp(NATIVE_OP_field::extract(opcode));
301	>	execute_native_op(NATIVE_OP_field::extract(opcode));
302		if (FN_field::test(opcode))
303		pc() = lr();
304		else
#	Line 290 \| Line 313 \| void sheepshaver_cpu::execute_sheep(uint
313		}
314
315		// Compile one instruction
293	–	bool sheepshaver_cpu::compile1(codegen_context_t & cg_context)
294	–	{
316		#if PPC_ENABLE_JIT
317	+	int sheepshaver_cpu::compile1(codegen_context_t & cg_context)
318	+	{
319		const instr_info_t *ii = cg_context.instr_info;
320		if (ii->mnemo != PPC_I(SHEEP))
321	<	return false;
321	>	return COMPILE_FAILURE;
322
323	<	bool compiled = false;
323	>	int status = COMPILE_FAILURE;
324		powerpc_dyngen & dg = cg_context.codegen;
325		uint32 opcode = cg_context.opcode;
326
327		switch (opcode & 0x3f) {
328		case 0: // EMUL_RETURN
329		dg.gen_invoke(QuitEmulator);
330	<	compiled = true;
330	>	status = COMPILE_CODE_OK;
331		break;
332
333		case 1: // EXEC_RETURN
334		dg.gen_spcflags_set(SPCFLAG_CPU_EXEC_RETURN);
335	<	compiled = true;
335	>	// Don't check for pending interrupts, we do know we have to
336	>	// get out of this block ASAP
337	>	dg.gen_exec_return();
338	>	status = COMPILE_EPILOGUE_OK;
339		break;
340
341		case 2: { // EXEC_NATIVE
342		uint32 selector = NATIVE_OP_field::extract(opcode);
343		switch (selector) {
344	+	#if !PPC_REENTRANT_JIT
345	+	// Filter out functions that may invoke Execute68k() or
346	+	// CallMacOS(), this would break reentrancy as they could
347	+	// invalidate the translation cache and even overwrite
348	+	// continuation code when we are done with them.
349		case NATIVE_PATCH_NAME_REGISTRY:
350		dg.gen_invoke(DoPatchNameRegistry);
351	<	compiled = true;
351	>	status = COMPILE_CODE_OK;
352		break;
353		case NATIVE_VIDEO_INSTALL_ACCEL:
354		dg.gen_invoke(VideoInstallAccel);
355	<	compiled = true;
355	>	status = COMPILE_CODE_OK;
356		break;
357		case NATIVE_VIDEO_VBL:
358		dg.gen_invoke(VideoVBL);
359	<	compiled = true;
359	>	status = COMPILE_CODE_OK;
360		break;
361		case NATIVE_GET_RESOURCE:
362		case NATIVE_GET_1_RESOURCE:
#	Line 343 \| Line 374 \| bool sheepshaver_cpu::compile1(codegen_c
374		typedef void (*func_t)(dyngen_cpu_base, uint32);
375		func_t func = (func_t)nv_mem_fun(&sheepshaver_cpu::get_resource).ptr();
376		dg.gen_invoke_CPU_im(func, old_get_resource);
377	<	compiled = true;
377	>	status = COMPILE_CODE_OK;
378		break;
379		}
349	–	case NATIVE_DISABLE_INTERRUPT:
350	–	dg.gen_invoke(DisableInterrupt);
351	–	compiled = true;
352	–	break;
353	–	case NATIVE_ENABLE_INTERRUPT:
354	–	dg.gen_invoke(EnableInterrupt);
355	–	compiled = true;
356	–	break;
380		case NATIVE_CHECK_LOAD_INVOC:
381		dg.gen_load_T0_GPR(3);
382		dg.gen_load_T1_GPR(4);
383		dg.gen_se_16_32_T1();
384		dg.gen_load_T2_GPR(5);
385		dg.gen_invoke_T0_T1_T2((void (*)(uint32, uint32, uint32))check_load_invoc);
386	<	compiled = true;
386	>	status = COMPILE_CODE_OK;
387	>	break;
388	>	#endif
389	>	case NATIVE_BITBLT:
390	>	dg.gen_load_T0_GPR(3);
391	>	dg.gen_invoke_T0((void (*)(uint32))NQD_bitblt);
392	>	status = COMPILE_CODE_OK;
393	>	break;
394	>	case NATIVE_INVRECT:
395	>	dg.gen_load_T0_GPR(3);
396	>	dg.gen_invoke_T0((void (*)(uint32))NQD_invrect);
397	>	status = COMPILE_CODE_OK;
398	>	break;
399	>	case NATIVE_FILLRECT:
400	>	dg.gen_load_T0_GPR(3);
401	>	dg.gen_invoke_T0((void (*)(uint32))NQD_fillrect);
402	>	status = COMPILE_CODE_OK;
403		break;
404		}
405	<	if (FN_field::test(opcode)) {
406	<	if (compiled) {
405	>	// Could we fully translate this NativeOp?
406	>	if (status == COMPILE_CODE_OK) {
407	>	if (!FN_field::test(opcode))
408	>	cg_context.done_compile = false;
409	>	else {
410		dg.gen_load_A0_LR();
411		dg.gen_set_PC_A0();
412	+	cg_context.done_compile = true;
413		}
414	<	cg_context.done_compile = true;
414	>	break;
415		}
416	<	else
416	>	#if PPC_REENTRANT_JIT
417	>	// Try to execute NativeOp trampoline
418	>	if (!FN_field::test(opcode))
419	>	dg.gen_set_PC_im(cg_context.pc + 4);
420	>	else {
421	>	dg.gen_load_A0_LR();
422	>	dg.gen_set_PC_A0();
423	>	}
424	>	dg.gen_mov_32_T0_im(selector);
425	>	dg.gen_jmp(native_op_trampoline);
426	>	cg_context.done_compile = true;
427	>	status = COMPILE_EPILOGUE_OK;
428	>	break;
429	>	#endif
430	>	// Invoke NativeOp handler
431	>	if (!FN_field::test(opcode)) {
432	>	typedef void (*func_t)(dyngen_cpu_base, uint32);
433	>	func_t func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_native_op).ptr();
434	>	dg.gen_invoke_CPU_im(func, selector);
435		cg_context.done_compile = false;
436	+	status = COMPILE_CODE_OK;
437	+	}
438	+	// Otherwise, let it generate a call to execute_sheep() which
439	+	// will cause necessary updates to the program counter
440		break;
441		}
442
443		default: { // EMUL_OP
444	+	uint32 emul_op = EMUL_OP_field::extract(opcode) - 3;
445	+	#if PPC_REENTRANT_JIT
446	+	// Try to execute EmulOp trampoline
447	+	dg.gen_set_PC_im(cg_context.pc + 4);
448	+	dg.gen_mov_32_T0_im(emul_op);
449	+	dg.gen_jmp(emul_op_trampoline);
450	+	cg_context.done_compile = true;
451	+	status = COMPILE_EPILOGUE_OK;
452	+	break;
453	+	#endif
454	+	// Invoke EmulOp handler
455		typedef void (*func_t)(dyngen_cpu_base, uint32);
456		func_t func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_emul_op).ptr();
457	<	dg.gen_invoke_CPU_im(func, EMUL_OP_field::extract(opcode) - 3);
457	>	dg.gen_invoke_CPU_im(func, emul_op);
458		cg_context.done_compile = false;
459	<	compiled = true;
459	>	status = COMPILE_CODE_OK;
460		break;
461		}
462		}
463	<	return compiled;
388	<	#endif
389	<	return false;
463	>	return status;
464		}
465	+	#endif
466
467		// Handle MacOS interrupt
468		void sheepshaver_cpu::interrupt(uint32 entry)
469		{
470		#if EMUL_TIME_STATS
471	<	interrupt_count++;
471	>	ppc_interrupt_count++;
472		const clock_t interrupt_start = clock();
473		#endif
474
400	–	#if !MULTICORE_CPU
475		// Save program counters and branch registers
476		uint32 saved_pc = pc();
477		uint32 saved_lr = lr();
478		uint32 saved_ctr= ctr();
479		uint32 saved_sp = gpr(1);
406	–	#endif
480
481		// Initialize stack pointer to SheepShaver alternate stack base
482		gpr(1) = SignalStackBase() - 64;
#	Line 443 \| Line 516 \| void sheepshaver_cpu::interrupt(uint32 e
516		// Enter nanokernel
517		execute(entry);
518
446	–	#if !MULTICORE_CPU
519		// Restore program counters and branch registers
520		pc() = saved_pc;
521		lr() = saved_lr;
522		ctr()= saved_ctr;
523		gpr(1) = saved_sp;
452	–	#endif
524
525		#if EMUL_TIME_STATS
526		interrupt_time += (clock() - interrupt_start);
#	Line 647 \| Line 718 \| inline void sheepshaver_cpu::get_resourc
718		* SheepShaver CPU engine interface
719		**/
720
721	<	static sheepshaver_cpu *main_cpu = NULL; // CPU emulator to handle usual control flow
722	<	static sheepshaver_cpu *interrupt_cpu = NULL; // CPU emulator to handle interrupts
652	<	static sheepshaver_cpu *current_cpu = NULL; // Current CPU emulator context
721	>	// PowerPC CPU emulator
722	>	static sheepshaver_cpu *ppc_cpu = NULL;
723
724		void FlushCodeCache(uintptr start, uintptr end)
725		{
726		D(bug("FlushCodeCache(%08x, %08x)\n", start, end));
727	<	main_cpu->invalidate_cache_range(start, end);
658	<	#if MULTICORE_CPU
659	<	interrupt_cpu->invalidate_cache_range(start, end);
660	<	#endif
661	<	}
662	<
663	<	static inline void cpu_push(sheepshaver_cpu *new_cpu)
664	<	{
665	<	#if MULTICORE_CPU
666	<	current_cpu = new_cpu;
667	<	#endif
668	<	}
669	<
670	<	static inline void cpu_pop()
671	<	{
672	<	#if MULTICORE_CPU
673	<	current_cpu = main_cpu;
674	<	#endif
727	>	ppc_cpu->invalidate_cache_range(start, end);
728		}
729
730		// Dump PPC registers
731		static void dump_registers(void)
732		{
733	<	current_cpu->dump_registers();
733	>	ppc_cpu->dump_registers();
734		}
735
736		// Dump log
737		static void dump_log(void)
738		{
739	<	current_cpu->dump_log();
739	>	ppc_cpu->dump_log();
740		}
741
742		/*
743		* Initialize CPU emulation
744		*/
745
746	<	static sigsegv_return_t sigsegv_handler(sigsegv_address_t fault_address, sigsegv_address_t fault_instruction)
746	>	sigsegv_return_t sigsegv_handler(sigsegv_address_t fault_address, sigsegv_address_t fault_instruction)
747		{
748		#if ENABLE_VOSF
749		// Handle screen fault
#	Line 702 \| Line 755 \| static sigsegv_return_t sigsegv_handler(
755		const uintptr addr = (uintptr)fault_address;
756		#if HAVE_SIGSEGV_SKIP_INSTRUCTION
757		// Ignore writes to ROM
758	<	if ((addr - ROM_BASE) < ROM_SIZE)
758	>	if ((addr - (uintptr)ROMBaseHost) < ROM_SIZE)
759		return SIGSEGV_RETURN_SKIP_INSTRUCTION;
760
761		// Get program counter of target CPU
762	<	sheepshaver_cpu * const cpu = current_cpu;
762	>	sheepshaver_cpu * const cpu = ppc_cpu;
763		const uint32 pc = cpu->pc();
764
765		// Fault in Mac ROM or RAM?
766	<	bool mac_fault = (pc >= ROM_BASE) && (pc < (ROM_BASE + ROM_AREA_SIZE)) \|\| (pc >= RAMBase) && (pc < (RAMBase + RAMSize));
766	>	bool mac_fault = (pc >= ROM_BASE) && (pc < (ROM_BASE + ROM_AREA_SIZE)) \|\| (pc >= RAMBase) && (pc < (RAMBase + RAMSize)) \|\| (pc >= DR_CACHE_BASE && pc < (DR_CACHE_BASE + DR_CACHE_SIZE));
767		if (mac_fault) {
768
769		// "VM settings" during MacOS 8 installation
#	Line 730 \| Line 783 \| static sigsegv_return_t sigsegv_handler(
783		return SIGSEGV_RETURN_SKIP_INSTRUCTION;
784		else if (pc == ROM_BASE + 0x4a10a0 && (cpu->gpr(20) == 0xf3012002 \|\| cpu->gpr(20) == 0xf3012000))
785		return SIGSEGV_RETURN_SKIP_INSTRUCTION;
786	+
787	+	// MacOS 8.6 serial drivers on startup (with DR Cache and OldWorld ROM)
788	+	else if ((pc - DR_CACHE_BASE) < DR_CACHE_SIZE && (cpu->gpr(16) == 0xf3012002 \|\| cpu->gpr(16) == 0xf3012000))
789	+	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
790	+	else if ((pc - DR_CACHE_BASE) < DR_CACHE_SIZE && (cpu->gpr(20) == 0xf3012002 \|\| cpu->gpr(20) == 0xf3012000))
791	+	return SIGSEGV_RETURN_SKIP_INSTRUCTION;
792
793		// Ignore writes to the zero page
794		else if ((uint32)(addr - SheepMem::ZeroPage()) < (uint32)SheepMem::PageSize())
#	Line 743 \| Line 802 \| static sigsegv_return_t sigsegv_handler(
802		#error "FIXME: You don't have the capability to skip instruction within signal handlers"
803		#endif
804
805	<	printf("SIGSEGV\n");
806	<	printf(" pc %p\n", fault_instruction);
807	<	printf(" ea %p\n", fault_address);
749	<	printf(" cpu %s\n", current_cpu == main_cpu ? "main" : "interrupts");
805	>	fprintf(stderr, "SIGSEGV\n");
806	>	fprintf(stderr, " pc %p\n", fault_instruction);
807	>	fprintf(stderr, " ea %p\n", fault_address);
808		dump_registers();
809	<	current_cpu->dump_log();
809	>	ppc_cpu->dump_log();
810		enter_mon();
811		QuitEmulator();
812
#	Line 757 \| Line 815 \| static sigsegv_return_t sigsegv_handler(
815
816		void init_emul_ppc(void)
817		{
818	+	// Get pointer to KernelData in host address space
819	+	kernel_data = (KernelData *)Mac2HostAddr(KERNEL_DATA_BASE);
820	+
821		// Initialize main CPU emulator
822	<	main_cpu = new sheepshaver_cpu();
823	<	main_cpu->set_register(powerpc_registers::GPR(3), any_register((uint32)ROM_BASE + 0x30d000));
824	<	main_cpu->set_register(powerpc_registers::GPR(4), any_register(KernelDataAddr + 0x1000));
822	>	ppc_cpu = new sheepshaver_cpu();
823	>	ppc_cpu->set_register(powerpc_registers::GPR(3), any_register((uint32)ROM_BASE + 0x30d000));
824	>	ppc_cpu->set_register(powerpc_registers::GPR(4), any_register(KernelDataAddr + 0x1000));
825		WriteMacInt32(XLM_RUN_MODE, MODE_68K);
826
766	–	#if MULTICORE_CPU
767	–	// Initialize alternate CPU emulator to handle interrupts
768	–	interrupt_cpu = new sheepshaver_cpu();
769	–	#endif
770	–
771	–	// Install the handler for SIGSEGV
772	–	sigsegv_install_handler(sigsegv_handler);
773	–
827		#if ENABLE_MON
828		// Install "regs" command in cxmon
829		mon_add_command("regs", dump_registers, "regs Dump PowerPC registers\n");
#	Line 796 \| Line 849 \| void exit_emul_ppc(void)
849		printf("Total emulation time : %.1f sec\n", double(emul_time) / double(CLOCKS_PER_SEC));
850		printf("Total interrupt count: %d (%2.1f Hz)\n", interrupt_count,
851		(double(interrupt_count) * CLOCKS_PER_SEC) / double(emul_time));
852	+	printf("Total ppc interrupt count: %d (%2.1f %%)\n", ppc_interrupt_count,
853	+	(double(ppc_interrupt_count) * 100.0) / double(interrupt_count));
854
855		#define PRINT_STATS(LABEL, VAR_PREFIX) do { \
856		printf("Total " LABEL " count : %d\n", VAR_PREFIX##_count); \
#	Line 812 \| Line 867 \| void exit_emul_ppc(void)
867		printf("\n");
868		#endif
869
870	<	delete main_cpu;
871	<	#if MULTICORE_CPU
872	<	delete interrupt_cpu;
873	<	#endif
870	>	delete ppc_cpu;
871	>	}
872	>
873	>	#if PPC_ENABLE_JIT && PPC_REENTRANT_JIT
874	>	// Initialize EmulOp trampolines
875	>	void init_emul_op_trampolines(basic_dyngen & dg)
876	>	{
877	>	typedef void (*func_t)(dyngen_cpu_base, uint32);
878	>	func_t func;
879	>
880	>	// EmulOp
881	>	emul_op_trampoline = dg.gen_start();
882	>	func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_emul_op).ptr();
883	>	dg.gen_invoke_CPU_T0(func);
884	>	dg.gen_exec_return();
885	>	dg.gen_end();
886	>
887	>	// NativeOp
888	>	native_op_trampoline = dg.gen_start();
889	>	func = (func_t)nv_mem_fun(&sheepshaver_cpu::execute_native_op).ptr();
890	>	dg.gen_invoke_CPU_T0(func);
891	>	dg.gen_exec_return();
892	>	dg.gen_end();
893	>
894	>	D(bug("EmulOp trampoline: %p\n", emul_op_trampoline));
895	>	D(bug("NativeOp trampoline: %p\n", native_op_trampoline));
896		}
897	+	#endif
898
899		/*
900		* Emulation loop
#	Line 824 \| Line 902 \| void exit_emul_ppc(void)
902
903		void emul_ppc(uint32 entry)
904		{
827	–	current_cpu = main_cpu;
905		#if 0
906	<	current_cpu->start_log();
906	>	ppc_cpu->start_log();
907		#endif
908		// start emulation loop and enable code translation or caching
909	<	current_cpu->execute(entry);
909	>	ppc_cpu->execute(entry);
910		}
911
912		/*
913		* Handle PowerPC interrupt
914		*/
915
839	–	#if ASYNC_IRQ
840	–	void HandleInterrupt(void)
841	–	{
842	–	main_cpu->handle_interrupt();
843	–	}
844	–	#else
916		void TriggerInterrupt(void)
917		{
918	+	idle_resume();
919		#if 0
920		WriteMacInt32(0x16a, ReadMacInt32(0x16a) + 1);
921		#else
922		// Trigger interrupt to main cpu only
923	<	if (main_cpu)
924	<	main_cpu->trigger_interrupt();
923	>	if (ppc_cpu)
924	>	ppc_cpu->trigger_interrupt();
925		#endif
926		}
855	–	#endif
927
928	<	void sheepshaver_cpu::handle_interrupt(void)
928	>	void HandleInterrupt(powerpc_registers *r)
929		{
930	<	// Do nothing if interrupts are disabled
931	<	if ((int32 )XLM_IRQ_NEST > 0)
932	<	return;
930	>	#ifdef USE_SDL_VIDEO
931	>	// We must fill in the events queue in the same thread that did call SDL_SetVideoMode()
932	>	SDL_PumpEvents();
933	>	#endif
934
935	<	// Do nothing if there is no interrupt pending
936	<	if (InterruptFlags == 0)
935	>	// Do nothing if interrupts are disabled
936	>	if (int32(ReadMacInt32(XLM_IRQ_NEST)) > 0)
937		return;
938
939	<	// Disable MacOS stack sniffer
940	<	WriteMacInt32(0x110, 0);
939	>	// Update interrupt count
940	>	#if EMUL_TIME_STATS
941	>	interrupt_count++;
942	>	#endif
943
944		// Interrupt action depends on current run mode
945		switch (ReadMacInt32(XLM_RUN_MODE)) {
946		case MODE_68K:
947		// 68k emulator active, trigger 68k interrupt level 1
874	–	assert(current_cpu == main_cpu);
948		WriteMacInt16(tswap32(kernel_data->v[0x67c >> 2]), 1);
949	<	set_cr(get_cr() \| tswap32(kernel_data->v[0x674 >> 2]));
949	>	r->cr.set(r->cr.get() \| tswap32(kernel_data->v[0x674 >> 2]));
950		break;
951
952		#if INTERRUPTS_IN_NATIVE_MODE
953		case MODE_NATIVE:
954		// 68k emulator inactive, in nanokernel?
955	<	assert(current_cpu == main_cpu);
956	<	if (gpr(1) != KernelDataAddr) {
955	>	if (r->gpr[1] != KernelDataAddr) {
956	>
957		// Prepare for 68k interrupt level 1
958		WriteMacInt16(tswap32(kernel_data->v[0x67c >> 2]), 1);
959		WriteMacInt32(tswap32(kernel_data->v[0x658 >> 2]) + 0xdc,
#	Line 889 \| Line 962 \| void sheepshaver_cpu::handle_interrupt(v
962
963		// Execute nanokernel interrupt routine (this will activate the 68k emulator)
964		DisableInterrupt();
892	–	cpu_push(interrupt_cpu);
965		if (ROMType == ROMTYPE_NEWWORLD)
966	<	current_cpu->interrupt(ROM_BASE + 0x312b1c);
966	>	ppc_cpu->interrupt(ROM_BASE + 0x312b1c);
967		else
968	<	current_cpu->interrupt(ROM_BASE + 0x312a3c);
897	<	cpu_pop();
968	>	ppc_cpu->interrupt(ROM_BASE + 0x312a3c);
969		}
970		break;
971		#endif
#	Line 903 \| Line 974 \| void sheepshaver_cpu::handle_interrupt(v
974		case MODE_EMUL_OP:
975		// 68k emulator active, within EMUL_OP routine, execute 68k interrupt routine directly when interrupt level is 0
976		if ((ReadMacInt32(XLM_68K_R25) & 7) == 0) {
977	+	#if EMUL_TIME_STATS
978	+	const clock_t interrupt_start = clock();
979	+	#endif
980		#if 1
981		// Execute full 68k interrupt routine
982		M68kRegisters r;
983		uint32 old_r25 = ReadMacInt32(XLM_68K_R25); // Save interrupt level
984		WriteMacInt32(XLM_68K_R25, 0x21); // Execute with interrupt level 1
985	<	static const uint8 proc[] = {
985	>	static const uint8 proc_template[] = {
986		0x3f, 0x3c, 0x00, 0x00, // move.w #$0000,-(sp) (fake format word)
987		0x48, 0x7a, 0x00, 0x0a, // pea @1(pc) (return address)
988		0x40, 0xe7, // move sr,-(sp) (saved SR)
#	Line 916 \| Line 990 \| void sheepshaver_cpu::handle_interrupt(v
990		0x4e, 0xd0, // jmp (a0)
991		M68K_RTS >> 8, M68K_RTS & 0xff // @1
992		};
993	<	Execute68k((uint32)proc, &r);
993	>	BUILD_SHEEPSHAVER_PROCEDURE(proc);
994	>	Execute68k(proc, &r);
995		WriteMacInt32(XLM_68K_R25, old_r25); // Restore interrupt level
996		#else
997		// Only update cursor
#	Line 928 \| Line 1003 \| void sheepshaver_cpu::handle_interrupt(v
1003		}
1004		}
1005		#endif
1006	+	#if EMUL_TIME_STATS
1007	+	interrupt_time += (clock() - interrupt_start);
1008	+	#endif
1009		}
1010		break;
1011		#endif
#	Line 940 \| Line 1018 \| static void get_ind_resource(void);
1018		static void get_1_ind_resource(void);
1019		static void r_get_resource(void);
1020
1021	<	#define GPR(REG) current_cpu->gpr(REG)
1022	<
945	<	static void NativeOp(int selector)
1021	>	// Execute NATIVE_OP routine
1022	>	void sheepshaver_cpu::execute_native_op(uint32 selector)
1023		{
1024		#if EMUL_TIME_STATS
1025		native_exec_count++;
#	Line 960 \| Line 1037 \| static void NativeOp(int selector)
1037		VideoVBL();
1038		break;
1039		case NATIVE_VIDEO_DO_DRIVER_IO:
1040	<	GPR(3) = (int32)(int16)VideoDoDriverIO((void )GPR(3), (void )GPR(4),
964	<	(void *)GPR(5), GPR(6), GPR(7));
1040	>	gpr(3) = (int32)(int16)VideoDoDriverIO(gpr(3), gpr(4), gpr(5), gpr(6), gpr(7));
1041		break;
966	–	#ifdef WORDS_BIGENDIAN
1042		case NATIVE_ETHER_IRQ:
1043		EtherIRQ();
1044		break;
1045		case NATIVE_ETHER_INIT:
1046	<	GPR(3) = InitStreamModule((void *)GPR(3));
1046	>	gpr(3) = InitStreamModule((void *)gpr(3));
1047		break;
1048		case NATIVE_ETHER_TERM:
1049		TerminateStreamModule();
1050		break;
1051		case NATIVE_ETHER_OPEN:
1052	<	GPR(3) = ether_open((queue_t )GPR(3), (void )GPR(4), GPR(5), GPR(6), (void*)GPR(7));
1052	>	gpr(3) = ether_open((queue_t )gpr(3), (void )gpr(4), gpr(5), gpr(6), (void*)gpr(7));
1053		break;
1054		case NATIVE_ETHER_CLOSE:
1055	<	GPR(3) = ether_close((queue_t )GPR(3), GPR(4), (void )GPR(5));
1055	>	gpr(3) = ether_close((queue_t )gpr(3), gpr(4), (void )gpr(5));
1056		break;
1057		case NATIVE_ETHER_WPUT:
1058	<	GPR(3) = ether_wput((queue_t )GPR(3), (mblk_t )GPR(4));
1058	>	gpr(3) = ether_wput((queue_t )gpr(3), (mblk_t )gpr(4));
1059		break;
1060		case NATIVE_ETHER_RSRV:
1061	<	GPR(3) = ether_rsrv((queue_t *)GPR(3));
1061	>	gpr(3) = ether_rsrv((queue_t *)gpr(3));
1062		break;
1063		case NATIVE_SYNC_HOOK:
1064	<	GPR(3) = NQD_sync_hook(GPR(3));
1064	>	gpr(3) = NQD_sync_hook(gpr(3));
1065		break;
1066		case NATIVE_BITBLT_HOOK:
1067	<	GPR(3) = NQD_bitblt_hook(GPR(3));
1067	>	gpr(3) = NQD_bitblt_hook(gpr(3));
1068		break;
1069		case NATIVE_BITBLT:
1070	<	NQD_bitblt(GPR(3));
1070	>	NQD_bitblt(gpr(3));
1071		break;
997	–	#if 0
1072		case NATIVE_FILLRECT_HOOK:
1073	<	GPR(3) = NQD_fillrect_hook(GPR(3));
1073	>	gpr(3) = NQD_fillrect_hook(gpr(3));
1074		break;
1075		case NATIVE_INVRECT:
1076	<	NQD_invrect(GPR(3));
1076	>	NQD_invrect(gpr(3));
1077		break;
1078	<	case NATIVE_FILLRECT_8:
1079	<	NQD_fillrect8(GPR(3));
1078	>	case NATIVE_FILLRECT:
1079	>	NQD_fillrect(gpr(3));
1080		break;
1007	–	case NATIVE_FILLRECT_32:
1008	–	NQD_fillrect32(GPR(3));
1009	–	break;
1010	–	#endif
1011	–	#else
1012	–	case NATIVE_ETHER_INIT:
1013	–	// FIXME: needs more complicated thunks
1014	–	GPR(3) = false;
1015	–	break;
1016	–	#endif
1081		case NATIVE_SERIAL_NOTHING:
1082		case NATIVE_SERIAL_OPEN:
1083		case NATIVE_SERIAL_PRIME_IN:
#	Line 1031 \| Line 1095 \| static void NativeOp(int selector)
1095		SerialStatus,
1096		SerialClose
1097		};
1098	<	GPR(3) = serial_callbacks[selector - NATIVE_SERIAL_NOTHING](GPR(3), GPR(4));
1098	>	gpr(3) = serial_callbacks[selector - NATIVE_SERIAL_NOTHING](gpr(3), gpr(4));
1099		break;
1100		}
1101		case NATIVE_GET_RESOURCE:
#	Line 1041 \| Line 1105 \| static void NativeOp(int selector)
1105		case NATIVE_R_GET_RESOURCE: {
1106		typedef void (*GetResourceCallback)(void);
1107		static const GetResourceCallback get_resource_callbacks[] = {
1108	<	get_resource,
1109	<	get_1_resource,
1110	<	get_ind_resource,
1111	<	get_1_ind_resource,
1112	<	r_get_resource
1108	>	::get_resource,
1109	>	::get_1_resource,
1110	>	::get_ind_resource,
1111	>	::get_1_ind_resource,
1112	>	::r_get_resource
1113		};
1114		get_resource_callbacks[selector - NATIVE_GET_RESOURCE]();
1115		break;
1116		}
1053	–	case NATIVE_DISABLE_INTERRUPT:
1054	–	DisableInterrupt();
1055	–	break;
1056	–	case NATIVE_ENABLE_INTERRUPT:
1057	–	EnableInterrupt();
1058	–	break;
1117		case NATIVE_MAKE_EXECUTABLE:
1118	<	MakeExecutable(0, (void *)GPR(4), GPR(5));
1118	>	MakeExecutable(0, gpr(4), gpr(5));
1119		break;
1120		case NATIVE_CHECK_LOAD_INVOC:
1121	<	check_load_invoc(GPR(3), GPR(4), GPR(5));
1121	>	check_load_invoc(gpr(3), gpr(4), gpr(5));
1122		break;
1123		default:
1124		printf("FATAL: NATIVE_OP called with bogus selector %d\n", selector);
#	Line 1081 \| Line 1139 \| static void NativeOp(int selector)
1139
1140		void Execute68k(uint32 pc, M68kRegisters *r)
1141		{
1142	<	current_cpu->execute_68k(pc, r);
1142	>	ppc_cpu->execute_68k(pc, r);
1143		}
1144
1145		/*
#	Line 1104 \| Line 1162 \| void Execute68kTrap(uint16 trap, M68kReg
1162
1163		uint32 call_macos(uint32 tvect)
1164		{
1165	<	return current_cpu->execute_macos_code(tvect, 0, NULL);
1165	>	return ppc_cpu->execute_macos_code(tvect, 0, NULL);
1166		}
1167
1168		uint32 call_macos1(uint32 tvect, uint32 arg1)
1169		{
1170		const uint32 args[] = { arg1 };
1171	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1171	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1172		}
1173
1174		uint32 call_macos2(uint32 tvect, uint32 arg1, uint32 arg2)
1175		{
1176		const uint32 args[] = { arg1, arg2 };
1177	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1177	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1178		}
1179
1180		uint32 call_macos3(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3)
1181		{
1182		const uint32 args[] = { arg1, arg2, arg3 };
1183	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1183	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1184		}
1185
1186		uint32 call_macos4(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4)
1187		{
1188		const uint32 args[] = { arg1, arg2, arg3, arg4 };
1189	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1189	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1190		}
1191
1192		uint32 call_macos5(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5)
1193		{
1194		const uint32 args[] = { arg1, arg2, arg3, arg4, arg5 };
1195	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1195	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1196		}
1197
1198		uint32 call_macos6(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5, uint32 arg6)
1199		{
1200		const uint32 args[] = { arg1, arg2, arg3, arg4, arg5, arg6 };
1201	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1201	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1202		}
1203
1204		uint32 call_macos7(uint32 tvect, uint32 arg1, uint32 arg2, uint32 arg3, uint32 arg4, uint32 arg5, uint32 arg6, uint32 arg7)
1205		{
1206		const uint32 args[] = { arg1, arg2, arg3, arg4, arg5, arg6, arg7 };
1207	<	return current_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1207	>	return ppc_cpu->execute_macos_code(tvect, sizeof(args)/sizeof(args[0]), args);
1208		}
1209
1210		/*
#	Line 1155 \| Line 1213 \| uint32 call_macos7(uint32 tvect, uint32
1213
1214		void get_resource(void)
1215		{
1216	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_RESOURCE));
1216	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_RESOURCE));
1217		}
1218
1219		void get_1_resource(void)
1220		{
1221	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_1_RESOURCE));
1221	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_1_RESOURCE));
1222		}
1223
1224		void get_ind_resource(void)
1225		{
1226	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_IND_RESOURCE));
1226	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_IND_RESOURCE));
1227		}
1228
1229		void get_1_ind_resource(void)
1230		{
1231	<	current_cpu->get_resource(ReadMacInt32(XLM_GET_1_IND_RESOURCE));
1231	>	ppc_cpu->get_resource(ReadMacInt32(XLM_GET_1_IND_RESOURCE));
1232		}
1233
1234		void r_get_resource(void)
1235		{
1236	<	current_cpu->get_resource(ReadMacInt32(XLM_R_GET_RESOURCE));
1236	>	ppc_cpu->get_resource(ReadMacInt32(XLM_R_GET_RESOURCE));
1237		}

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing SheepShaver/src/kpx_cpu/sheepshaver_glue.cpp (file contents): Revision 1.32 by gbeauche, 2004-04-18T23:03:53Z vs. Revision 1.64 by gbeauche, 2005-06-30T10:17:58Z

Diff Legend

Comparing SheepShaver/src/kpx_cpu/sheepshaver_glue.cpp (file contents):
Revision 1.32 by gbeauche, 2004-04-18T23:03:53Z vs.
Revision 1.64 by gbeauche, 2005-06-30T10:17:58Z