src/MacOSX/configure.in

dnl Process this file with autoconf to produce a configure script.
dnl Based on Unix/configure.in
dnl Written in 1999 by Christian Bauer et al.

AC_INIT(main_macosx.mm)
AC_PREREQ(2.12)
AC_CONFIG_HEADER(config.h)

dnl Video options.
AC_ARG_ENABLE(multiwin,
[  --enable-multiwin    allow multiple emulator windows [default=no]], [WANT_MWIN=$enableval], [WANT_MWIN=no])

dnl JIT compiler options.
AC_ARG_ENABLE(jit-compiler,  [  --enable-jit-compiler   enable JIT compiler [default=no]], [WANT_JIT=$enableval], [WANT_JIT=no])
AC_ARG_ENABLE(jit-debug,     [  --enable-jit-debug      activate native code disassemblers [default=no]], [WANT_JIT_DEBUG=$enableval], [WANT_JIT_DEBUG=no])

dnl FPU emulation core.
AC_ARG_ENABLE(fpe,
[  --enable-fpe=FPE        specify which fpu emulator to use [default=auto]],
[ case "$enableval" in
    dnl default is always ieee, if architecture has this fp format
    auto)       FPE_CORE_TEST_ORDER="ieee uae";;
    ieee)       FPE_CORE_TEST_ORDER="ieee";;
    uae)        FPE_CORE_TEST_ORDER="uae";;
    x86)        FPE_CORE_TEST_ORDER="x86";;
        *)              AC_MSG_ERROR([--enable-fpe takes only one of the following values: auto, x86, ieee, uae]);;
  esac
],
[ FPE_CORE_TEST_ORDER="ieee uae"
])

dnl Addressing modes.
AC_ARG_ENABLE(addressing,
[  --enable-addressing=AM  specify the addressing mode to use [default=fastest]],
[ case "$enableval" in
    real)       ADDRESSING_TEST_ORDER="real";;
    direct)     ADDRESSING_TEST_ORDER="direct";;
    banks)      ADDRESSING_TEST_ORDER="banks";;
    fastest)ADDRESSING_TEST_ORDER="direct banks";;
    *)          AC_MSG_ERROR([--enable-addressing takes only one of the following values: fastest, real, direct, banks]);;
  esac
],
[ ADDRESSING_TEST_ORDER="direct banks"
])

dnl External packages.
AC_ARG_WITH(mon,             [  --with-mon              use mon as debugger [default=yes]], [WANT_MON=$withval], [WANT_MON=yes])

dnl Canonical system information.
AC_CANONICAL_HOST
AC_CANONICAL_TARGET

dnl Target OS type
OS_TYPE=darwin
DEFINES="$DEFINES -DOS_$OS_TYPE"

dnl Target CPU type.
HAVE_I386=no
HAVE_M68K=no
HAVE_SPARC=no
HAVE_POWERPC=no
case "$target_cpu" in
  i386* | i486* | i586* | i686* | i786* ) CPU_TYPE=i386 HAVE_I386=yes;;
  m68k* ) CPU_TYPE=m68k HAVE_M68K=yes;;
  sparc* ) CPU_TYPE=sparc HAVE_SPARC=yes;;
  powerpc* ) CPU_TYPE=powerpc HAVE_POWERPC=yes;;
  *) CPU_TYPE=`echo $target_cpu | sed -e 's/-/_/g'`;;
esac
DEFINES="$DEFINES -DCPU_$CPU_TYPE"

dnl Checks for programs.
AC_PROG_CC
AC_PROG_CC_C_O
AC_PROG_CPP
AC_PROG_CXX
AC_PROG_MAKE_SET
AC_PROG_INSTALL

dnl MacOSX (and later?) have a particular header for defining the OS version
AC_CHECK_HEADER(AvailabilityMacros.h)
if [[ "x$ac_cv_header_AvailabilityMacros_h" = "xyes" ]]; then
  DEFINES="$DEFINES -DAVAILABILITYMACROS"
fi

dnl We use mon if possible.
MONSRCS=
if [[ "x$WANT_MON" = "xyes" ]]; then
  AC_MSG_CHECKING(for mon)
  mon_srcdir=../../../mon/src
  if grep mon_init $mon_srcdir/mon.h >/dev/null 2>/dev/null; then
    AC_MSG_RESULT(yes)
    AC_DEFINE(ENABLE_MON, 1, [Define if using "mon".])
    MONSRCS="$mon_srcdir/mon.cpp $mon_srcdir/mon_6502.cpp $mon_srcdir/mon_z80.cpp $mon_srcdir/mon_cmd.cpp $mon_srcdir/mon_disass.cpp $mon_srcdir/mon_ppc.cpp $mon_srcdir/mon_lowmem.cpp $mon_srcdir/disass/floatformat.c $mon_srcdir/disass/i386-dis.c $mon_srcdir/disass/m68k-dis.c $mon_srcdir/disass/m68k-opc.c"
    CXXFLAGS="$CXXFLAGS -I$mon_srcdir -I$mon_srcdir/disass"
    AC_CHECK_LIB(termcap, tputs)
    AC_CHECK_LIB(readline, readline)
    AC_CHECK_HEADERS(readline.h history.h readline/readline.h readline/history.h)
  else
    AC_MSG_RESULT(no)
    AC_MSG_WARN([Could not find mon, ignoring --with-mon.])
    WANT_MON=no
  fi
fi

dnl We want pthreads.
HAVE_PTHREADS=yes
AC_CHECK_FUNCS(pthread_cancel)
AC_CHECK_FUNCS(pthread_mutexattr_setprotocol)
AC_CHECK_FUNCS(pthread_mutexattr_settype)
AC_CHECK_FUNCS(pthread_mutexattr_setpshared)

dnl If POSIX.4 semaphores are not available, we emulate them with pthread mutexes.
SEMSRC=
AC_CHECK_FUNCS(sem_init, , [
  if test "x$HAVE_PTHREADS" = "xyes"; then
    SEMSRC=posix_sem.cpp
  fi
])

dnl We want to enable multiple window support if possible
if [[ "x$WANT_MWIN" = "xyes" ]]; then
  WANT_MWIN=yes
  DEFINES="$DEFINES -DENABLE_MULTIPLE"
fi

dnl We use 64-bit file size support if possible.
AC_SYS_LARGEFILE

dnl Checks for header files.
AC_HEADER_STDC
AC_CHECK_HEADERS(unistd.h fcntl.h sys/time.h sys/mman.h)

dnl Checks for typedefs, structures, and compiler characteristics.
AC_C_BIGENDIAN
AC_C_CONST
AC_C_INLINE
AC_CHECK_SIZEOF(short, 2)
AC_CHECK_SIZEOF(int, 4)
AC_CHECK_SIZEOF(long, 4)
AC_CHECK_SIZEOF(long long, 8)
AC_CHECK_SIZEOF(float, 4)
AC_CHECK_SIZEOF(double, 8)
AC_CHECK_SIZEOF(long double, 12)
AC_CHECK_SIZEOF(void *, 4)
AC_TYPE_OFF_T
AC_CHECK_TYPE(loff_t, off_t)
AC_CHECK_TYPE(caddr_t, [char *])
AC_TYPE_SIZE_T
AC_TYPE_SIGNAL
AC_HEADER_TIME
AC_STRUCT_TM

dnl AC_CHECK_TYPE(socklen_t)
dnl Check whether sys/socket.h defines type socklen_t.
dnl (extracted from ac-archive/Miscellaneous)
AC_CACHE_CHECK([for socklen_t],
  ac_cv_type_socklen_t, [
  AC_TRY_COMPILE([
    #include <sys/types.h>
    #include <sys/socket.h>
  ], [socklen_t len = 42; return 0;],
  ac_cv_type_socklen_t=yes, ac_cv_type_socklen_t=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_type_socklen_t="guessing no"
  )
])
if [[ "x$ac_cv_type_socklen_t" != "xyes" ]]; then
  AC_DEFINE(socklen_t, int, [Define to 'int' if <sys/types.h> doesn't define.])
fi


dnl Checks for library functions.
AC_CHECK_FUNCS(strdup cfmakeraw)
AC_CHECK_FUNCS(clock_gettime timer_create)
AC_CHECK_FUNCS(sigaction signal)
AC_CHECK_FUNCS(mmap mprotect munmap)
AC_CHECK_FUNCS(vm_allocate vm_deallocate vm_protect)

dnl Darwin seems to define mach_task_self() instead of task_self().
AC_CHECK_FUNCS(mach_task_self task_self)

dnl Select system-dependant source files.
DEFINES="$DEFINES -DBSD_COMP"
  dnl Check for the CAM library
  AC_CHECK_LIB(cam, cam_open_btl, HAVE_LIBCAM=yes, HAVE_LIBCAM=no) 
  if [[ "x$HAVE_LIBCAM" = "xno" ]]; then
    AC_MSG_WARN([Cannot find libcam for SCSI management, disabling SCSI support.])
  else
    dnl Check for the sys kernel includes
    AC_CHECK_HEADER(camlib.h)
    if [[ "x$ac_cv_header_camlib_h" = "xno" ]]; then
      dnl In this case I should fix this thing including a "patch"
      dnl to access directly to the functions in the kernel :) --Orlando
      AC_MSG_WARN([Cannot find includes for CAM library, disabling SCSI support.])
    else
      SCSISRC=FreeBSD/scsi_freebsd.cpp
      LIBS="$LIBS -lcam"
      DEFINES="$DEFINES -DCAM"
    fi
  fi

dnl Use 68k CPU natively?
WANT_NATIVE_M68K=no

SYSSRCS="$SERIALSRC $ETHERSRC $SCSISRC $AUDIOSRC $SEMSRC $UISRCS $MONSRCS $EXTRASYSSRCS"

dnl Define a macro that translates a yesno-variable into a C macro definition
dnl to be put into the config.h file
dnl $1 -- the macro to define
dnl $2 -- the value to translate
dnl $3 -- template name
AC_DEFUN(AC_TRANSLATE_DEFINE, [
    if [[ "x$2" = "xyes" -o "x$2" = "xguessing yes" ]]; then
        AC_DEFINE($1, 1, $3)
    fi
])

dnl Various checks if the system supports vm_allocate() and the like functions.
have_mach_vm=no
if [[ "x$ac_cv_func_vm_allocate" = "xyes" -a "x$ac_cv_func_vm_deallocate" = "xyes" -a \
      "x$ac_cv_func_vm_protect" = "xyes" ]]; then
  have_mach_vm=yes
fi
AC_TRANSLATE_DEFINE(HAVE_MACH_VM, "$have_mach_vm",
  [Define if your system has a working vm_allocate()-based memory allocator.])

dnl Check that vm_allocate(), vm_protect() work
if [[ "x$have_mach_vm" = "xyes" ]]; then

AC_CACHE_CHECK([whether vm_protect works],
  ac_cv_vm_protect_works, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  ac_cv_vm_protect_works=yes
  dnl First the tests that should segfault
  for test_def in NONE_READ NONE_WRITE READ_WRITE; do
    AC_TRY_RUN([
      #define CONFIGURE_TEST_VM_MAP
      #define TEST_VM_PROT_$test_def
      #include "../Unix/vm_alloc.cpp"
    ], ac_cv_vm_protect_works=no, rm -f core,
    dnl When cross-compiling, do not assume anything
    ac_cv_vm_protect_works="guessing no"
    )
  done
  AC_TRY_RUN([
    #define CONFIGURE_TEST_VM_MAP
    #define TEST_VM_PROT_RDWR_WRITE
    #include "../Unix/vm_alloc.cpp"
  ], , ac_cv_vm_protect_works=no,
  dnl When cross-compiling, do not assume anything
  ac_cv_vm_protect_works="guessing no"
  )
  AC_LANG_RESTORE
  ]
)

dnl Remove support for vm_allocate() if vm_protect() does not work
if [[ "x$have_mach_vm" = "xyes" ]]; then
  case $ac_cv_vm_protect_works in
    *yes) have_mach_vm=yes;;
    *no) have_mach_vm=no;;
  esac
fi
AC_TRANSLATE_DEFINE(HAVE_MACH_VM, "$have_mach_vm",
  [Define if your system has a working vm_allocate()-based memory allocator.])

fi dnl HAVE_MACH_VM

dnl Various checks if the system supports mmap() and the like functions.
dnl ... and Mach memory allocators are not supported
have_mmap_vm=no
if [[ "x$ac_cv_func_mmap" = "xyes" -a "x$ac_cv_func_munmap" = "xyes" -a \
      "x$ac_cv_func_mprotect" = "xyes" ]]; then
  if [[ "x$have_mach_vm" = "xno" ]]; then
    have_mmap_vm=yes
  fi
fi
AC_TRANSLATE_DEFINE(HAVE_MMAP_VM, "$have_mmap_vm",
  [Define if your system has a working mmap()-based memory allocator.])

dnl Check that mmap() and associated functions work.
if [[ "x$have_mmap_vm" = "xyes" ]]; then

dnl Check if we have a working anonymous mmap()
AC_CACHE_CHECK([whether mmap supports MAP_ANON],
  ac_cv_mmap_anon, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  AC_TRY_RUN([
    #define HAVE_MMAP_ANON
    #define CONFIGURE_TEST_VM_MAP
    #define TEST_VM_MMAP_ANON
    #include "../Unix/vm_alloc.cpp"
  ], ac_cv_mmap_anon=yes, ac_cv_mmap_anon=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_mmap_anon="guessing no"
  )
  AC_LANG_RESTORE
  ]
)
AC_TRANSLATE_DEFINE(HAVE_MMAP_ANON, "$ac_cv_mmap_anon",
  [Define if <sys/mman.h> defines MAP_ANON and mmap()'ing with MAP_ANON works.])

AC_CACHE_CHECK([whether mmap supports MAP_ANONYMOUS],
  ac_cv_mmap_anonymous, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  AC_TRY_RUN([
    #define HAVE_MMAP_ANONYMOUS
    #define CONFIGURE_TEST_VM_MAP
    #define TEST_VM_MMAP_ANON
    #include "../Unix/vm_alloc.cpp"
  ], ac_cv_mmap_anonymous=yes, ac_cv_mmap_anonymous=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_mmap_anonymous="guessing no"
  )
  AC_LANG_RESTORE
  ]
)
AC_TRANSLATE_DEFINE(HAVE_MMAP_ANONYMOUS, "$ac_cv_mmap_anonymous",
  [Define if <sys/mman.h> defines MAP_ANONYMOUS and mmap()'ing with MAP_ANONYMOUS works.])

AC_CACHE_CHECK([whether mprotect works],
  ac_cv_mprotect_works, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  ac_cv_mprotect_works=yes
  dnl First the tests that should segfault
  for test_def in NONE_READ NONE_WRITE READ_WRITE; do
    AC_TRY_RUN([
      #define CONFIGURE_TEST_VM_MAP
      #define TEST_VM_PROT_$test_def
      #include "../Unix/vm_alloc.cpp"
    ], ac_cv_mprotect_works=no, rm -f core,
    dnl When cross-compiling, do not assume anything
    ac_cv_mprotect_works="guessing no"
    )
  done
  AC_TRY_RUN([
    #define CONFIGURE_TEST_VM_MAP
    #define TEST_VM_PROT_RDWR_WRITE
    #include "../Unix/vm_alloc.cpp"
  ], , ac_cv_mprotect_works=no,
  dnl When cross-compiling, do not assume anything
  ac_cv_mprotect_works="guessing no"
  )
  AC_LANG_RESTORE
  ]
)

dnl Remove support for mmap() if mprotect() does not work
if [[ "x$have_mmap_vm" = "xyes" ]]; then
  case $ac_cv_mprotect_works in
    *yes) have_mmap_vm=yes;;
    *no) have_mmap_vm=no;;
  esac
fi
AC_TRANSLATE_DEFINE(HAVE_MMAP_VM, $have_mmap_vm,
  [Define if your system has a working mmap()-based memory allocator.])

fi dnl HAVE_MMAP_VM

dnl Check if we can mmap 0x2000 bytes from 0x0000
AC_CACHE_CHECK([whether we can map Low Memory area 0x0000-0x2000],
  ac_cv_can_map_lm, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  AC_TRY_RUN([
    #include "../Unix/vm_alloc.cpp"
    int main(void) { /* returns 0 if we could map the lowmem globals */
      volatile char * lm;
      if (vm_init() < 0) exit(1);
      if ((lm = (volatile char *)vm_acquire_fixed(0, 0x2000)) == VM_MAP_FAILED) exit(1);
      lm[0] = 'z';
      if (vm_release((char *)lm, 0x2000) < 0) exit(1);
      vm_exit(); exit(0);
    }
  ], ac_cv_can_map_lm=yes, ac_cv_can_map_lm=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_can_map_lm="guessing no"
  )
  AC_LANG_RESTORE
  ]
)

dnl Check signal handlers need to be reinstalled
AC_CACHE_CHECK([whether signal handlers need to be reinstalled],
  ac_cv_signal_need_reinstall, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  AC_TRY_RUN([
    #include <stdlib.h>
    #ifdef HAVE_UNISTD_H
    #include <unistd.h>
    #endif
    #include <signal.h>
    static int handled_signal = 0;
    RETSIGTYPE sigusr1_handler(int) { handled_signal++; }
    int main(void) { /* returns 0 if signals need not to be reinstalled */
      signal(SIGUSR1, sigusr1_handler); raise(SIGUSR1); raise(SIGUSR1);
      exit(handled_signal == 2);
    }
  ], ac_cv_signal_need_reinstall=yes, ac_cv_signal_need_reinstall=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_signal_need_reinstall="guessing yes"
  )
  AC_LANG_RESTORE
  ]
)
AC_TRANSLATE_DEFINE(SIGNAL_NEED_REINSTALL, "$ac_cv_signal_need_reinstall",
  [Define if your system requires signals to be reinstalled.])

dnl Check if sigaction handlers need to be reinstalled
AC_CACHE_CHECK([whether sigaction handlers need to be reinstalled],
  ac_cv_sigaction_need_reinstall, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  AC_TRY_RUN([
    #include <stdlib.h>
    #ifdef HAVE_UNISTD_H
    #include <unistd.h>
    #endif
    #include <signal.h>
    static int handled_signal = 0;
    RETSIGTYPE sigusr1_handler(int) { handled_signal++; }
    typedef RETSIGTYPE (*signal_handler)(int);
    static signal_handler mysignal(int sig, signal_handler handler) {
      struct sigaction old_sa;
      struct sigaction new_sa;
      new_sa.sa_handler = handler;
      return ((sigaction(sig,&new_sa,&old_sa) < 0) ? SIG_IGN : old_sa.sa_handler);
    }
    int main(void) { /* returns 0 if signals need not to be reinstalled */
      mysignal(SIGUSR1, sigusr1_handler); raise(SIGUSR1); raise(SIGUSR1);
      exit(handled_signal == 2);
    }
  ], ac_cv_sigaction_need_reinstall=yes, ac_cv_sigaction_need_reinstall=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_sigaction_need_reinstall="guessing yes"
  )
  AC_LANG_RESTORE
  ]
)
AC_TRANSLATE_DEFINE(SIGACTION_NEED_REINSTALL, "$ac_cv_sigaction_need_reinstall",
  [Define if your system requires sigactions to be reinstalled.])

dnl Check if extended signals are supported.
AC_CACHE_CHECK([whether your system supports extended signal handlers],
  ac_cv_have_extended_signals, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  AC_TRY_RUN([
    #define HAVE_SIGINFO_T 1
    #define CONFIGURE_TEST_SIGSEGV_RECOVERY
    #include "../Unix/vm_alloc.cpp"
    #include "../Unix/sigsegv.cpp"
  ], ac_cv_have_extended_signals=yes, ac_cv_have_extended_signals=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_have_extended_signals=no
  )
  AC_LANG_RESTORE
  ]
)
AC_TRANSLATE_DEFINE(HAVE_SIGINFO_T, "$ac_cv_have_extended_signals",
  [Define if your system support extended signals.])

dnl This program never returns (exits) on OS X
dnl Otherwise, check for subterfuges.
dnl if [[ "x$ac_cv_have_extended_signals" = "xno" ]]; then
dnl   AC_CACHE_CHECK([whether we then have a subterfuge for your system],
dnl   ac_cv_have_sigcontext_hack, [
dnl     AC_LANG_SAVE
dnl     AC_LANG_CPLUSPLUS
dnl     AC_TRY_RUN([
dnl       #define HAVE_SIGCONTEXT_SUBTERFUGE 1
dnl       #define CONFIGURE_TEST_SIGSEGV_RECOVERY
dnl       #include "../Unix/vm_alloc.cpp"
dnl       #include "../Unix/sigsegv.cpp"
dnl     ], ac_cv_have_sigcontext_hack=yes, ac_cv_have_sigcontext_hack=no,
dnl     dnl When cross-compiling, do not assume anything.
dnl     ac_cv_have_sigcontext_hack=no
dnl     )
dnl     AC_LANG_RESTORE
dnl   ])
dnl   AC_TRANSLATE_DEFINE(HAVE_SIGCONTEXT_SUBTERFUGE, "$ac_cv_have_sigcontext_hack",
dnl     [Define if we know a hack to replace siginfo_t->si_addr member.])
dnl fi

dnl Check if we can ignore the fault (instruction skipping in SIGSEGV handler)
AC_CACHE_CHECK([whether we can skip instruction in SIGSEGV handler],
  ac_cv_have_skip_instruction, [
  AC_LANG_SAVE
  AC_LANG_CPLUSPLUS
  AC_TRY_RUN([
    #define HAVE_SIGSEGV_SKIP_INSTRUCTION 1
    #define CONFIGURE_TEST_SIGSEGV_RECOVERY
    #include "../Unix/vm_alloc.cpp"
    #include "../Unix/sigsegv.cpp"
  ], ac_cv_have_skip_instruction=yes, ac_cv_have_skip_instruction=no,
  dnl When cross-compiling, do not assume anything.
  ac_cv_have_skip_instruction=no
  )
  AC_LANG_RESTORE
  ]
)
AC_TRANSLATE_DEFINE(HAVE_SIGSEGV_SKIP_INSTRUCTION, "$ac_cv_have_skip_instruction",
  [Define if we can ignore the fault (instruction skipping in SIGSEGV handler).])

dnl Can we do Video on SEGV Signals ?
CAN_VOSF=no
if [[ "$ac_cv_have_extended_signals" = "yes" -o "$ac_cv_have_sigcontext_hack" = "yes" ]]; then
  CAN_VOSF=yes
fi

dnl Determine the addressing mode to use
if [[ "x$WANT_NATIVE_M68K" = "xyes" ]]; then
  ADDRESSING_MODE="real"
else
  ADDRESSING_MODE=""
  AC_MSG_CHECKING([for the addressing mode to use])
  for am in $ADDRESSING_TEST_ORDER; do
    case $am in
    real)
      dnl Requires ability to mmap() Low Memory globals
      if [[ "x$ac_cv_can_map_lm" = "xno" ]]; then
        continue
      fi
          dnl Requires VOSF screen updates
      if [[ "x$CAN_VOSF" = "xno" ]]; then
        continue
      fi
      dnl Real addressing will probably work.
      ADDRESSING_MODE="real"
      WANT_VOSF=yes dnl we can use VOSF and we need it actually
      DEFINES="$DEFINES -DREAL_ADDRESSING"
      break
      ;;
    direct)
      dnl Requires VOSF screen updates
      if [[ "x$CAN_VOSF" = "xyes" ]]; then
        ADDRESSING_MODE="direct"
        WANT_VOSF=yes dnl we can use VOSF and we need it actually
        DEFINES="$DEFINES -DDIRECT_ADDRESSING"
        break
      fi
      ;;
    banks)
      dnl Default addressing mode
      ADDRESSING_MODE="memory banks"
      break
      ;;
    *)
      AC_MSG_ERROR([Internal configure.in script error for $am addressing mode])
    esac
  done
  AC_MSG_RESULT($ADDRESSING_MODE)
  if [[ "x$ADDRESSING_MODE" = "x" ]]; then
    AC_MSG_WARN([Sorry, no suitable addressing mode in $ADDRESSING_TEST_ORDER])
    ADDRESSING_MODE="memory banks"
  fi
fi

dnl Banked Memory Addressing mode is not supported by the JIT compiler
if [[ "x$WANT_JIT" = "xyes" -a "x$ADDRESSING_MODE" = "xmemory banks" ]]; then
  AC_MSG_ERROR([Sorry, the JIT Compiler requires Direct Addressing, at least])
fi

dnl Enable VOSF screen updates with this feature is requested and feasible
if [[ "x$WANT_VOSF" = "xyes" -a "x$CAN_VOSF" = "xyes" ]]; then
    AC_DEFINE(ENABLE_VOSF, 1, [Define if using video enabled on SEGV signals.])
else
    WANT_VOSF=no
fi

dnl Check for GAS.
HAVE_GAS=no
AC_MSG_CHECKING(for GAS .p2align feature)
cat >conftest.S << EOF
        .text
        .p2align 5
EOF
if $CC conftest.S -c -o conftest.o >/dev/null 2>&1 ; then HAVE_GAS=yes; fi
AC_MSG_RESULT($HAVE_GAS)

dnl Check for GCC 2.7 or higher.
HAVE_GCC27=no
AC_MSG_CHECKING(for GCC 2.7 or higher)
AC_EGREP_CPP(yes,
[#if __GNUC__ - 1 > 1 || __GNUC_MINOR__ - 1 > 5
  yes
#endif
], [AC_MSG_RESULT(yes); HAVE_GCC27=yes], AC_MSG_RESULT(no))

dnl Check for GCC 3.0 or higher.
HAVE_GCC30=no
AC_MSG_CHECKING(for GCC 3.0 or higher)
AC_EGREP_CPP(yes,
[#if __GNUC__ >= 3
  yes
#endif
], [AC_MSG_RESULT(yes); HAVE_GCC30=yes], AC_MSG_RESULT(no))

dnl Set "-fomit-frame-pointer" on i386 GCC 2.7 or higher.
dnl Also set "-fno-exceptions" for C++ because exception handling requires
dnl the frame pointer.
if [[ "x$HAVE_GCC27" = "xyes" -a "x$HAVE_I386" = "xyes" ]]; then
  CFLAGS="$CFLAGS -fomit-frame-pointer"
  CXXFLAGS="$CXXFLAGS -fomit-frame-pointer -fno-exceptions"
fi

dnl (gb) Do not merge constants since it breaks fpu/fpu_x86.cpp.
dnl As of 2001/08/02, this affects the following compilers:
dnl Official: probably gcc-3.1 (mainline CVS)
dnl Mandrake: gcc-2.96 >= 0.59mdk, gcc-3.0.1 >= 0.1mdk
dnl Red Hat : gcc-2.96 >= 89, gcc-3.0 >= 1
if [[ "x$HAVE_GCC27" = "xyes" ]]; then
  SAVED_CXXFLAGS="$CXXFLAGS"
  CXXFLAGS="$CXXFLAGS -fno-merge-constants"
  AC_CACHE_CHECK([whether GCC supports constants merging], ac_cv_gcc_constants_merging, [
    AC_LANG_SAVE
    AC_LANG_CPLUSPLUS
    AC_TRY_COMPILE([],[],[ac_cv_gcc_constants_merging=yes],[ac_cv_gcc_constants_merging=no])
    AC_LANG_RESTORE
  ])
  if [[ "x$ac_cv_gcc_constants_merging" != "xyes" ]]; then
    CXXFLAGS="$SAVED_CXXFLAGS"
  fi
fi

dnl Select appropriate CPU source and REGPARAM define.
ASM_OPTIMIZATIONS=none
CPUSRCS="cpuemu1.cpp cpuemu2.cpp cpuemu3.cpp cpuemu4.cpp cpuemu5.cpp cpuemu6.cpp cpuemu7.cpp cpuemu8.cpp"

dnl (gb) JITSRCS will be emptied later if the JIT is not available
dnl Other platforms should define their own set of noflags file variants
CAN_JIT=no
JITSRCS="compemu1.cpp compemu2.cpp compemu3.cpp compemu4.cpp compemu5.cpp compemu6.cpp compemu7.cpp compemu8.cpp"

if [[ "x$HAVE_GCC27" = "xyes" -a "x$HAVE_I386" = "xyes" -a "x$OS_TYPE" != "xfreebsd" ]]; then
  dnl i386 CPU
  DEFINES="$DEFINES -DUNALIGNED_PROFITABLE -DREGPARAM=\"__attribute__((regparm(3)))\""
  if [[ "x$HAVE_GAS" = "xyes" ]]; then
    ASM_OPTIMIZATIONS=i386
    DEFINES="$DEFINES -DX86_ASSEMBLY -DOPTIMIZED_FLAGS -DSAHF_SETO_PROFITABLE"
    CPUSRCS="cpufast1.s cpufast2.s cpufast3.s cpufast4.s cpufast5.s cpufast6.s cpufast7.s cpufast8.s"
    JITSRCS="cpufast1_nf.s cpufast2_nf.s cpufast3_nf.s cpufast4_nf.s cpufast5_nf.s cpufast6_nf.s cpufast7_nf.s cpufast8_nf.s $JITSRCS"
  fi
  CAN_JIT=yes
elif [[ "x$HAVE_GCC27" = "xyes" -a "x$HAVE_SPARC" = "xyes" -a "x$HAVE_GAS" = "xyes" ]]; then
  dnl SPARC CPU
  case "$target_os" in
  solaris*)
    AC_MSG_CHECKING(SPARC CPU architecture)
    SPARC_TYPE=`Solaris/which_sparc`
    AC_MSG_RESULT($SPARC_TYPE)
    case "$SPARC_TYPE" in
    SPARC_V8)
      ASM_OPTIMIZATIONS="SPARC V8 architecture"
      DEFINES="$DEFINES -DSPARC_V8_ASSEMBLY" dnl -DOPTIMIZED_FLAGS"
      CFLAGS="$CFLAGS -Wa,-Av8"
      CXXFLAGS="$CXXFLAGS -Wa,-Av8"
      ;;
    SPARC_V9)
      ASM_OPTIMIZATIONS="SPARC V9 architecture"
      DEFINES="$DEFINES -DSPARC_V9_ASSEMBLY" dnl -DOPTIMIZED_FLAGS"
      CFLAGS="$CFLAGS -Wa,-Av9"
      CXXFLAGS="$CXXFLAGS -Wa,-Av9"
      ;;
    esac
    ;;
  esac
elif [[ "x$WANT_NATIVE_M68K" = "xyes" ]]; then
  dnl Native m68k, no emulation
  CPUINCLUDES="-I../native_cpu"
  CPUSRCS="asm_support.s"
fi

dnl Enable JIT compiler, if possible.
if [[ "x$WANT_JIT" = "xyes" -a "x$CAN_JIT" ]]; then
  JITSRCS="$JITSRCS ../uae_cpu/compiler/compemu_support.cpp ../uae_cpu/compiler/compemu_fpp.cpp compstbl.o cpustbl_nf.o"
  DEFINES="$DEFINES -DUSE_JIT -DUSE_JIT_FPU"
  
  if [[ "x$WANT_JIT_DEBUG" = "xyes" ]]; then
    if [[ "x$WANT_MON" = "xyes" ]]; then
      DEFINES="$DEFINES -DJIT_DEBUG=1"
    else
      AC_MSG_WARN([cxmon not found, ignoring --enable-jit-debug])
      WANT_JIT_DEBUG=no
    fi
  fi

  dnl IEEE core is the only FPU emulator to use with the JIT compiler
  case $FPE_CORE_TEST_ORDER in
  ieee*) ;;
  *) AC_MSG_WARN([Forcing use of the IEEE FPU core, as the JIT compiler supports only this one.]) ;;
  esac
  FPE_CORE_TEST_ORDER="ieee"
else
  WANT_JIT=no
  WANT_JIT_DEBUG=no
  JITSRCS=""
fi

dnl Utility macro used by next two tests.
dnl AC_EXAMINE_OBJECT(C source code,
dnl     commands examining object file,
dnl     [commands to run if compile failed]):
dnl
dnl Compile the source code to an object file; then convert it into a
dnl printable representation.  All unprintable characters and
dnl asterisks (*) are replaced by dots (.).  All white space is
dnl deleted.  Newlines (ASCII 0x10) in the input are preserved in the
dnl output, but runs of newlines are compressed to a single newline.
dnl Finally, line breaks are forcibly inserted so that no line is
dnl longer than 80 columns and the file ends with a newline.  The
dnl result of all this processing is in the file conftest.dmp, which
dnl may be examined by the commands in the second argument.
dnl
AC_DEFUN([gcc_AC_EXAMINE_OBJECT],
[AC_LANG_SAVE
AC_LANG_C
dnl Next bit cribbed from AC_TRY_COMPILE.
cat > conftest.$ac_ext <<EOF
[#line __oline__ "configure"
#include "confdefs.h"
$1
]EOF
if AC_TRY_EVAL(ac_compile); then
  od -c conftest.o |
    sed ['s/^[0-7]*[    ]*/ /
          s/\*/./g
          s/ \\n/*/g
          s/ [0-9][0-9][0-9]/./g
          s/  \\[^ ]/./g'] |
    tr -d '
 ' | tr -s '*' '
' | fold | sed '$a\
' > conftest.dmp
  $2
ifelse($3, , , else
  $3
)dnl
fi
rm -rf conftest*
AC_LANG_RESTORE])

dnl Floating point format probe.
dnl The basic concept is the same as the above: grep the object
dnl file for an interesting string.  We have to watch out for
dnl rounding changing the values in the object, however; this is
dnl handled by ignoring the least significant byte of the float.
dnl
dnl Does not know about VAX G-float or C4x idiosyncratic format.
dnl It does know about PDP-10 idiosyncratic format, but this is
dnl not presently supported by GCC.  S/390 "binary floating point"
dnl is in fact IEEE (but maybe we should have that in EBCDIC as well
dnl as ASCII?)
dnl
AC_DEFUN([gcc_AC_C_FLOAT_FORMAT],
[AC_CACHE_CHECK(floating point format, ac_cv_c_float_format,
[gcc_AC_EXAMINE_OBJECT(
[/* This will not work unless sizeof(double) == 8.  */
extern char sizeof_double_must_be_8 [sizeof(double) == 8 ? 1 : -1];

/* This structure must have no internal padding.  */
struct possibility {
  char prefix[8];
  double candidate;
  char postfix[8];
};

#define C(cand) { "\nformat:", cand, ":tamrof\n" }
struct possibility table [] =
{
  C( 3.25724264705901305206e+01), /* @@IEEEFP - IEEE 754 */
  C( 3.53802595280598432000e+18), /* D__float - VAX */
  C( 5.32201830133125317057e-19), /* D.PDP-10 - PDP-10 - the dot is 0x13a */
  C( 1.77977764695171661377e+10), /* IBMHEXFP - s/390 format, ascii */
  C(-5.22995989424860458374e+10)  /* IBMHEXFP - s/390 format, EBCDIC */
};],
 [if   grep 'format:.@IEEEF.:tamrof' conftest.dmp >/dev/null 2>&1; then
    ac_cv_c_float_format='IEEE (big-endian)'
  elif grep 'format:.I@@PFE.:tamrof' conftest.dmp >/dev/null 2>&1; then
    ac_cv_c_float_format='IEEE (big-endian)'
  elif grep 'format:.FEEEI@.:tamrof' conftest.dmp >/dev/null 2>&1; then
    ac_cv_c_float_format='IEEE (little-endian)'
  elif grep 'format:.EFP@@I.:tamrof' conftest.dmp >/dev/null 2>&1; then
    ac_cv_c_float_format='IEEE (little-endian)'
  elif grep 'format:.__floa.:tamrof' conftest.dmp >/dev/null 2>&1; then
    ac_cv_c_float_format='VAX D-float'
  elif grep 'format:..PDP-1.:tamrof' conftest.dmp >/dev/null 2>&1; then
    ac_cv_c_float_format='PDP-10'
  elif grep 'format:.BMHEXF.:tamrof' conftest.dmp >/dev/null 2>&1; then
    ac_cv_c_float_format='IBM 370 hex'
  else
    AC_MSG_ERROR(Unknown floating point format)
  fi],
  [AC_MSG_ERROR(compile failed)])
])
# IEEE is the default format.  If the float endianness isn't the same
# as the integer endianness, we have to set FLOAT_WORDS_BIG_ENDIAN
# (which is a tristate: yes, no, default).  This is only an issue with
# IEEE; the other formats are only supported by a few machines each,
# all with the same endianness.
format=IEEE_FLOAT_FORMAT
fbigend=
case $ac_cv_c_float_format in
    'IEEE (big-endian)' )
        if test $ac_cv_c_bigendian = no; then
            fbigend=1
        fi
        ;;
    'IEEE (little-endian)' )
        if test $ac_cv_c_bigendian = yes; then
            fbigend=0
        fi
        ;;
    'VAX D-float' )
        format=VAX_FLOAT_FORMAT
        ;;
    'PDP-10' )
        format=PDP10_FLOAT_FORMAT
        ;;
    'IBM 370 hex' )
        format=IBM_FLOAT_FORMAT
        ;;
esac
AC_DEFINE_UNQUOTED(HOST_FLOAT_FORMAT, $format,
  [Define to the floating point format of the host machine.])
if test -n "$fbigend"; then
        AC_DEFINE_UNQUOTED(HOST_FLOAT_WORDS_BIG_ENDIAN, $fbigend,
  [Define to 1 if the host machine stores floating point numbers in
   memory with the word containing the sign bit at the lowest address,
   or to 0 if it does it the other way around.

   This macro should not be defined if the ordering is the same as for
   multi-word integers.])
fi
])

dnl Select appropriate FPU source.
gcc_AC_C_FLOAT_FORMAT
AC_CHECK_HEADERS(ieee754.h ieeefp.h floatingpoint.h nan.h)

for fpe in $FPE_CORE_TEST_ORDER; do
  case $fpe in
  ieee)
    case $ac_cv_c_float_format in
    IEEE*)
      FPE_CORE="IEEE fpu core"
      DEFINES="$DEFINES -DFPU_IEEE"
      FPUSRCS="../uae_cpu/fpu/fpu_ieee.cpp"
      dnl Math functions not mandated by C99 standard
      AC_CHECK_FUNCS(isnanl isinfl)
      dnl Math functions required by C99 standard, but probably not
      dnl implemented everywhere. In that case, we fall back to the
      dnl regular variant for doubles.
      AC_CHECK_FUNCS(logl log10l expl powl fabsl sqrtl)
      AC_CHECK_FUNCS(sinl cosl tanl sinhl coshl tanhl)
      AC_CHECK_FUNCS(asinl acosl atanl asinhl acoshl atanhl)
      AC_CHECK_FUNCS(floorl ceill)
      break
      ;;
    esac
    ;;
  x86)
    if [[ ":$HAVE_GCC27:$HAVE_I386:$HAVE_GAS:" = ":yes:yes:yes:" ]]; then
      FPE_CORE="i387 fpu core"
      DEFINES="$DEFINES -DFPU_X86"
      FPUSRCS="../uae_cpu/fpu/fpu_x86.cpp"
      break
    fi
    ;;
  uae)
    FPE_CORE="uae fpu core"
    DEFINES="$DEFINES -DFPU_UAE"
    FPUSRCS="../uae_cpu/fpu/fpu_uae.cpp"
    break
    ;;
  *)
    AC_MSG_ERROR([Internal configure.in script error for $fpe fpu core])
    ;;
  esac
done
if [[ "x$FPE_CORE" = "x" ]]; then
  AC_MSG_ERROR([Sorry, no suitable FPU core found in $FPE_CORE_TEST_ORDER])
fi

dnl Check for certain math functions
AC_CHECK_FUNCS(atanh)
AC_CHECK_FUNCS(isnan isinf finite isnormal signbit)

dnl UAE CPU sources for all non-m68k-native architectures.
if [[ "x$WANT_NATIVE_M68K" = "xno" ]]; then
  CPUINCLUDES="-I../uae_cpu"
  CPUSRCS="../uae_cpu/basilisk_glue.cpp ../uae_cpu/memory.cpp ../uae_cpu/newcpu.cpp ../uae_cpu/readcpu.cpp $FPUSRCS cpustbl.cpp cpudefs.cpp $CPUSRCS $JITSRCS"
fi

dnl Remove the "-g" option if set for GCC.
if [[ "x$HAVE_GCC27" = "xyes" ]]; then
  CFLAGS=`echo $CFLAGS | sed -e 's/-g//g'`
  CXXFLAGS=`echo $CXXFLAGS | sed -e 's/-g//g'`
fi

dnl Or if we have -Ofast
if [[ "x$HAVE_OFAST" = "xyes" ]]; then
  CFLAGS="`echo $CFLAGS | sed -e 's/-g//g'` -Ofast"
  CXXFLAGS="`echo $CXXFLAGS | sed -e 's/-g//g'` -Ofast"
  CXXFLAGS="-LANG:std $CXXFLAGS"
  LDFLAGS="$LDFLAGS -ipa"
fi

dnl Generate Makefile.
AC_SUBST(DEFINES)
AC_SUBST(SYSSRCS)
AC_SUBST(CPUINCLUDES)
AC_SUBST(CPUSRCS)
AC_OUTPUT(Makefile)

dnl Print summary.
echo
echo Basilisk II configuration summary:
echo
echo Multiple emulator windows .............. : $WANT_MWIN
echo Enable video on SEGV signals ........... : $WANT_VOSF
echo mon debugger support ................... : $WANT_MON
echo Use JIT compiler ....................... : $WANT_JIT
echo JIT debug mode ......................... : $WANT_JIT_DEBUG
echo Floating-Point emulation core .......... : $FPE_CORE
echo Assembly optimizations ................. : $ASM_OPTIMIZATIONS
echo Addressing mode ........................ : $ADDRESSING_MODE
echo
echo "Configuration done. Now type \"make\" (or \"make ide\")."


Revision:	1.7
Committed:	2002-10-31T08:52:59Z (22 years ago) by nigel
Branch:	MAIN
Changes since 1.6:	+6 -0 lines
Log Message:	SOme 10.2 compile fixes