| 106 |
|
be made available, using the real addressing mode is not possible. |
| 107 |
|
|
| 108 |
|
Note: currently, real addressing mode is known to work only on AmigaOS, |
| 109 |
< |
NetBSD/m68k, and Linux/i386. |
| 109 |
> |
NetBSD/m68k, FreeBSD/i386 and Linux/i386. |
| 110 |
|
|
| 111 |
|
4. Native CPU (EMULATED_68K = 0, this also requires REAL_ADDRESSING = 1) |
| 112 |
|
This mode is designed for systems that use a 68k (68020 or better) processor |
| 223 |
|
currently defined interrupt sources (see main.h): |
| 224 |
|
|
| 225 |
|
INTFLAG_60HZ - MacOS 60Hz interrupt (unlike a real Mac, we also handle |
| 226 |
< |
VBL interrupts, ADB events and the Time Manager here) |
| 226 |
> |
VBL interrupts and the Time Manager here) |
| 227 |
> |
INTFLAG_1HZ - MacOS 1Hz interrupt (updates system time) |
| 228 |
|
INTFLAG_SERIAL - Interrupt for serial driver I/O completion |
| 229 |
|
INTFLAG_ETHER - Interrupt for Ethernet driver I/O completion and packet |
| 230 |
|
reception |
| 231 |
|
INTFLAG_AUDIO - Interrupt for audio "next block" requests |
| 232 |
|
INTFLAG_TIMER - Reserved for a future implementation of a more precise |
| 233 |
|
Time Manager (currently not used) |
| 234 |
+ |
INTFLAG_ADB - Interrupt for mouse/keyboard input |
| 235 |
+ |
INTFLAG_NMI - NMI for debugging (not supported on all platforms) |
| 236 |
|
|
| 237 |
|
An interrupt is triggered by calling SetInterruptFlag() with the desired |
| 238 |
|
interrupt flag constant and then TriggerInterrupt(). When the UAE 68k |
| 295 |
|
provides replacements for certain parts of MacOS to redirect input, output |
| 296 |
|
and system control functions of the Mac hardware to the underlying operating |
| 297 |
|
systems. This is done by applying patches to the Mac ROM ("ROM patches") and |
| 298 |
< |
the MacOS system file ("resource patches", because nearly all system software |
| 299 |
< |
is contained in MacOS resources). Unless resources are written back to disk, |
| 300 |
< |
the system file patches are not permanent (it would cause many problems if |
| 301 |
< |
they were permanent, because some of the patches vary with different |
| 302 |
< |
versions of Basilisk II or even every time the emulator is launched). |
| 298 |
> |
the MacOS system file ("resource patches", because nearly all system |
| 299 |
> |
software is contained in MacOS resources). Unless resources are written back |
| 300 |
> |
to disk, the system file patches are not permanent (it would cause many |
| 301 |
> |
problems if they were permanent, because some of the patches vary with |
| 302 |
> |
different versions of Basilisk II or even every time the emulator is |
| 303 |
> |
launched). |
| 304 |
|
|
| 305 |
|
ROM patches are contained in "rom_patches.cpp" and resource patches are |
| 306 |
< |
contained in "rsrc_patches.cpp". The ROM patches are far more numerous because |
| 307 |
< |
nearly all the software needed to run MacOS is contained in the Mac ROM (the |
| 308 |
< |
system file itself consists mainly of ROM patches, in addition to pictures and |
| 309 |
< |
text). One part of the ROM patches involves the construction of a NuBus slot |
| 310 |
< |
declaration ROM (in "slot_rom.cpp") which is used to add the video and Ethernet |
| 311 |
< |
drivers. Apart from the CPU emulation, the ROM and resource patches contain |
| 312 |
< |
most of the "logic" of the emulator. |
| 306 |
> |
contained in "rsrc_patches.cpp". The ROM patches are far more numerous |
| 307 |
> |
because nearly all the software needed to run MacOS is contained in the Mac |
| 308 |
> |
ROM (the system file itself consists mainly of ROM patches, in addition to |
| 309 |
> |
pictures and text). One part of the ROM patches involves the construction of |
| 310 |
> |
a NuBus slot declaration ROM (in "slot_rom.cpp") which is used to add the |
| 311 |
> |
video and Ethernet drivers. Apart from the CPU emulation, the ROM and |
| 312 |
> |
resource patches contain most of the "logic" of the emulator. |
| 313 |
|
|
| 314 |
|
6.3. PRAM Utilities |
| 315 |
|
------------------- |
| 316 |
|
|
| 317 |
|
MacOS stores certain nonvolatile system parameters in a 256 byte battery |
| 318 |
< |
backed-up CMOS RAM area called "Parameter RAM", "PRAM" or "XPRAM" (which refers |
| 319 |
< |
to "Extended PRAM" because the earliest Mac models only had 20 bytes of PRAM). |
| 320 |
< |
Basilisk II patches the ClkNoMem() MacOS trap which is used to access the XPRAM |
| 321 |
< |
(apart from some routines which are only used early during system startup) |
| 322 |
< |
and the real-time clock. The XPRAM is emulated in a 256 byte array which is |
| 323 |
< |
saved to disk to preserve the contents for the next time Basilisk is launched. |
| 318 |
> |
backed-up CMOS RAM area called "Parameter RAM", "PRAM" or "XPRAM" (which |
| 319 |
> |
refers to "Extended PRAM" because the earliest Mac models only had 20 bytes |
| 320 |
> |
of PRAM). Basilisk II patches the ClkNoMem() MacOS trap which is used to |
| 321 |
> |
access the XPRAM (apart from some routines which are only used early during |
| 322 |
> |
system startup) and the real-time clock. The XPRAM is emulated in a 256 byte |
| 323 |
> |
array which is saved to disk to preserve the contents for the next time |
| 324 |
> |
Basilisk is launched. |
| 325 |
|
|
| 326 |
|
6.4. ADB Manager |
| 327 |
|
---------------- |
| 328 |
|
|
| 329 |
|
For emulating a mouse and a keyboard, Basilisk II patches the ADBOp() MacOS |
| 330 |
|
trap. Platform-dependant code reports mouse and keyboard events with the |
| 331 |
< |
ADBMouseDown() etc. functions which are queued and sent to MacOS inside the |
| 332 |
< |
ADBInterrupt() function (which is called as a part of the 60Hz interrupt |
| 333 |
< |
handler) by calling the ADB mouse and keyboard handlers with Execute68k(). |
| 331 |
> |
ADBMouseDown() etc. functions where they are queued, and the INTFLAG_ADB |
| 332 |
> |
interrupt is triggered. The ADBInterrupt() handler function sends the input |
| 333 |
> |
events to MacOS by calling the ADB mouse and keyboard handlers with |
| 334 |
> |
Execute68k(). |
| 335 |
|
|
| 336 |
|
6.5. Time Manager |
| 337 |
|
----------------- |
| 338 |
|
|
| 339 |
|
Basilisk II completely replaces the Time Manager (InsTime(), RmvTime(), |
| 340 |
< |
PrimeTime() and Microseconds() traps). A "TMDesc" structure is associated with |
| 341 |
< |
each Time Manager task, that contains additional data. The tasks are executed |
| 342 |
< |
in the TimerInterrupt() function which is currently called inside the 60Hz |
| 343 |
< |
interrupt handler, thus limiting the resolution of the Time Manager to 16.6ms. |
| 340 |
> |
PrimeTime() and Microseconds() traps). A "TMDesc" structure is associated |
| 341 |
> |
with each Time Manager task, that contains additional data. The tasks are |
| 342 |
> |
executed in the TimerInterrupt() function which is currently called inside |
| 343 |
> |
the 60Hz interrupt handler, thus limiting the resolution of the Time Manager |
| 344 |
> |
to 16.6ms. |
| 345 |
|
|
| 346 |
|
6.6. SCSI Manager |
| 347 |
|
----------------- |
| 348 |
|
|
| 349 |
|
The (old-style) SCSI Manager is also completely replaced and the MacOS |
| 350 |
< |
SCSIDispatch() trap redirected to the routines in "scsi.cpp". Under the MacOS, |
| 351 |
< |
programs have to issue multiple calls for all the different phases of a |
| 352 |
< |
SCSI bus interaction (arbitration, selection, command transfer etc.). |
| 350 |
> |
SCSIDispatch() trap redirected to the routines in "scsi.cpp". Under the |
| 351 |
> |
MacOS, programs have to issue multiple calls for all the different phases of |
| 352 |
> |
a SCSI bus interaction (arbitration, selection, command transfer etc.). |
| 353 |
|
Basilisk II maps this API to an atomic API which is used by most modern |
| 354 |
|
operating systems. All action is deferred until the call to SCSIComplete(). |
| 355 |
|
The TIB (Transfer Instruction Block) mini-programs used by the MacOS are |
| 356 |
|
translated into a scatter/gather list of data blocks. Operating systems that |
| 357 |
< |
don't support scatter/gather SCSI I/O will have to use buffering if more than |
| 358 |
< |
one data block is being transmitted. Some more advanced (but rarely used) |
| 359 |
< |
aspects of the SCSI Manager (like messaging and compare operations) are not |
| 360 |
< |
emulated. |
| 357 |
> |
don't support scatter/gather SCSI I/O will have to use buffering if more |
| 358 |
> |
than one data block is being transmitted. Some more advanced (but rarely |
| 359 |
> |
used) aspects of the SCSI Manager (like messaging and compare operations) |
| 360 |
> |
are not emulated. |
| 361 |
|
|
| 362 |
|
6.7. Video driver |
| 363 |
|
----------------- |
| 364 |
|
|
| 365 |
< |
The NuBus slot declaration ROM constructed in "slot_rom.cpp" contains a driver |
| 366 |
< |
definition for a video driver. The Control and Status calls of this driver are |
| 367 |
< |
implemented in "video.cpp". Run-time video mode and depth switching are |
| 361 |
< |
currently not supported. |
| 365 |
> |
The NuBus slot declaration ROM constructed in "slot_rom.cpp" contains a |
| 366 |
> |
driver definition for a video driver. The Control and Status calls of this |
| 367 |
> |
driver are implemented in "video.cpp". |
| 368 |
|
|
| 369 |
|
The host-side initialization of the video system is done in VideoInit(). |
| 370 |
< |
This function must provide access to a frame buffer for MacOS and supply |
| 371 |
< |
its address, resolution and color depth in a video_desc structure (there |
| 372 |
< |
is currently only one video_desc structure, called VideoMonitor; this is |
| 373 |
< |
going to change once multiple displays are supported). In real addressing |
| 374 |
< |
mode, this frame buffer must be in a MacOS compatible layout (big-endian |
| 375 |
< |
and 1, 2, 4 or 8 bits paletted chunky pixels, RGB 5:5:5 or xRGB 8:8:8:8). |
| 376 |
< |
In virtual addressing mode, the frame buffer is located at address |
| 377 |
< |
0xa0000000 on the Mac side and you have to supply the host address, size |
| 378 |
< |
and layout (BasiliskII will do an automatic pixel format conversion in |
| 379 |
< |
virtual addressing mode) in the variables MacFrameBaseHost, MacFrameSize |
| 380 |
< |
and MacFrameLayout. |
| 370 |
> |
This function must fill the VideoModes vector with a list of supported video |
| 371 |
> |
modes (combinations of color depth and resolution). It must then call |
| 372 |
> |
video_init_depth_list() and setup the VideoMonitor structure with the |
| 373 |
> |
default mode information and the address of a frame buffer for MacOS. In |
| 374 |
> |
real addressing mode, this frame buffer must be in a MacOS compatible layout |
| 375 |
> |
(big-endian and 1, 2, 4 or 8 bits paletted chunky pixels, RGB 5:5:5 or xRGB |
| 376 |
> |
8:8:8:8). In virtual addressing mode, the frame buffer is located at address |
| 377 |
> |
0xa0000000 on the Mac side and you have to supply the host address, size and |
| 378 |
> |
layout (BasiliskII will do an automatic pixel format conversion in virtual |
| 379 |
> |
addressing mode) in the variables MacFrameBaseHost, MacFrameSize and |
| 380 |
> |
MacFrameLayout. |
| 381 |
> |
|
| 382 |
> |
There are two functions of the platform-dependant video driver code that get |
| 383 |
> |
called during runtime: video_set_palette() to update the CLUT (for indexed |
| 384 |
> |
modes) or gamma table (for direct color modes), and video_switch_to_mode() |
| 385 |
> |
to switch to a different color depth and/or resolution (in this case the |
| 386 |
> |
frame buffer base in VideoMonitor must be updated). |
| 387 |
|
|
| 388 |
|
6.8. Audio component |
| 389 |
|
-------------------- |
| 390 |
|
|
| 391 |
|
Basilisk II provides a Sound Manager 3.x audio component for sound output. |
| 392 |
< |
Earlier Sound Manager versions that don't use components but 'snth' resources |
| 393 |
< |
are not supported. Nearly all component functions are implemented in |
| 394 |
< |
"audio.cpp". The system-dependant modules ("audio_*.cpp") handle the |
| 392 |
> |
Earlier Sound Manager versions that don't use components but 'snth' |
| 393 |
> |
resources are not supported. Nearly all component functions are implemented |
| 394 |
> |
in "audio.cpp". The system-dependant modules ("audio_*.cpp") handle the |
| 395 |
|
initialization of the audio hardware/driver, volume controls, and the actual |
| 396 |
|
sound output. |
| 397 |
|
|
| 398 |
|
The mechanism of sound output varies depending on the platform but usually |
| 399 |
< |
there will be one "streaming thread" (either a thread that continuously writes |
| 400 |
< |
data buffers to the audio device or a callback function that provides the |
| 401 |
< |
next data buffer) that reads blocks of sound data from the MacOS Sound Manager |
| 402 |
< |
and writes them to the audio device. To request the next data buffer, the |
| 403 |
< |
streaming thread triggers the INTFLAG_AUDIO interrupt which will cause the |
| 404 |
< |
MacOS thread to eventually call AudioInterrupt(). Inside AudioInterrupt(), |
| 405 |
< |
the next data block will be read and the streaming thread is signalled that |
| 406 |
< |
new audio data is available. |
| 399 |
> |
there will be one "streaming thread" (either a thread that continuously |
| 400 |
> |
writes data buffers to the audio device or a callback function that provides |
| 401 |
> |
the next data buffer) that reads blocks of sound data from the MacOS Sound |
| 402 |
> |
Manager and writes them to the audio device. To request the next data |
| 403 |
> |
buffer, the streaming thread triggers the INTFLAG_AUDIO interrupt which will |
| 404 |
> |
cause the MacOS thread to eventually call AudioInterrupt(). Inside |
| 405 |
> |
AudioInterrupt(), the next data block will be read and the streaming thread |
| 406 |
> |
is signalled that new audio data is available. |
| 407 |
|
|
| 408 |
|
6.9. Floppy, disk and CD-ROM drivers |
| 409 |
|
------------------------------------ |
| 410 |
|
|
| 411 |
< |
Basilisk II contains three MacOS drivers that implement floppy, disk and CD-ROM |
| 412 |
< |
access ("sony.cpp", "disk.cpp" and "cdrom.cpp"). They rely heavily on the |
| 413 |
< |
functionality provided by the "sys_*.cpp" module. BTW, the name ".Sony" of the |
| 414 |
< |
MacOS floppy driver comes from the fact that the 3.5" floppy drive in the first |
| 415 |
< |
Mac models was custom-built for Apple by Sony (this was one of the first |
| 416 |
< |
applications of the 3.5" floppy format which was also invented by Sony). |
| 411 |
> |
Basilisk II contains three MacOS drivers that implement floppy, disk and |
| 412 |
> |
CD-ROM access ("sony.cpp", "disk.cpp" and "cdrom.cpp"). They rely heavily on |
| 413 |
> |
the functionality provided by the "sys_*.cpp" module. BTW, the name ".Sony" |
| 414 |
> |
of the MacOS floppy driver comes from the fact that the 3.5" floppy drive in |
| 415 |
> |
the first Mac models was custom-built for Apple by Sony (this was one of the |
| 416 |
> |
first applications of the 3.5" floppy format which was also invented by |
| 417 |
> |
Sony). |
| 418 |
|
|
| 419 |
|
6.10. External file system |
| 420 |
|
-------------------------- |
| 421 |
|
|
| 422 |
|
Basilisk II also provides a method for accessing files and direcories on the |
| 423 |
< |
host OS from the MacOS side by means of an "external" file system (henceforth |
| 424 |
< |
called "ExtFS"). The ExtFS is built upon the File System Manager 1.2 interface |
| 425 |
< |
that is built into MacOS 7.6 (and later) and available as a system extension |
| 426 |
< |
for earlier MacOS versions. Unlike other parts of Basilisk II, extfs.cpp |
| 427 |
< |
requires POSIX file I/O and this is not going to change any time soon, so if |
| 428 |
< |
you are porting Basilisk II to a system without POSIX file functions, you |
| 429 |
< |
should emulate them. |
| 423 |
> |
host OS from the MacOS side by means of an "external" file system |
| 424 |
> |
(henceforth called "ExtFS"). The ExtFS is built upon the File System Manager |
| 425 |
> |
1.2 interface that is built into MacOS 7.6 (and later) and available as a |
| 426 |
> |
system extension for earlier MacOS versions. Unlike other parts of Basilisk |
| 427 |
> |
II, extfs.cpp requires POSIX file I/O and this is not going to change any |
| 428 |
> |
time soon, so if you are porting Basilisk II to a system without POSIX file |
| 429 |
> |
functions, you should emulate them. |
| 430 |
|
|
| 431 |
|
6.11. Serial drivers |
| 432 |
|
-------------------- |
| 439 |
|
platform-dependant code. There are two instances (for port A and B) of the |
| 440 |
|
subclasses. |
| 441 |
|
|
| 442 |
< |
Unlike the disk drivers, the serial driver must be able to handle asynchronous |
| 443 |
< |
operations. Calls to SerialPrime() will usually not actually transmit or receive |
| 444 |
< |
data but delegate the action to an independant thread. SerialPrime() then |
| 445 |
< |
returns "1" to indicate that the I/O operation is not yet completed. The |
| 446 |
< |
completion of the I/O request is signalled by calling the MacOS trap "IODone". |
| 447 |
< |
However, this can't be done by the I/O thread because it's not in the right |
| 448 |
< |
run-time environment to call MacOS functions. Therefore it will trigger the |
| 449 |
< |
INTFLAG_SERIAL interrupt which causes the MacOS thread to eventually call |
| 450 |
< |
SerialInterrupt(). SerialInterrupt(), in turn, will not call IODone either but |
| 451 |
< |
install a Deferred Task to do the job. The Deferred Task will be called by |
| 452 |
< |
MacOS when it returns to interrupt level 0. This mechanism sounds complicated |
| 453 |
< |
but is necessary to ensure stable operation of the serial driver. |
| 442 |
> |
Unlike the disk drivers, the serial driver must be able to handle |
| 443 |
> |
asynchronous operations. Calls to SerialPrime() will usually not actually |
| 444 |
> |
transmit or receive data but delegate the action to an independant thread. |
| 445 |
> |
SerialPrime() then returns "1" to indicate that the I/O operation is not yet |
| 446 |
> |
completed. The completion of the I/O request is signalled by calling the |
| 447 |
> |
MacOS trap "IODone". However, this can't be done by the I/O thread because |
| 448 |
> |
it's not in the right run-time environment to call MacOS functions. |
| 449 |
> |
Therefore it will trigger the INTFLAG_SERIAL interrupt which causes the |
| 450 |
> |
MacOS thread to eventually call SerialInterrupt(). SerialInterrupt(), in |
| 451 |
> |
turn, will not call IODone either but install a Deferred Task to do the job. |
| 452 |
> |
The Deferred Task will be called by MacOS when it returns to interrupt level |
| 453 |
> |
0. This mechanism sounds complicated but is necessary to ensure stable |
| 454 |
> |
operation of the serial driver. |
| 455 |
|
|
| 456 |
|
6.12. Ethernet driver |
| 457 |
|
--------------------- |
| 464 |
|
or it may require writing special net drivers or add-ons or running with |
| 465 |
|
superuser priviledges to get access to the raw packets. |
| 466 |
|
|
| 467 |
< |
Writing packets works as in the serial drivers. The ether_write() routine may |
| 468 |
< |
choose to send the packet immediately (e.g. under BeOS) and return noErr or to |
| 469 |
< |
delegate the sending to a separate thread (e.g. under AmigaOS) and return "1" to |
| 470 |
< |
indicate that the operation is still in progress. For the latter case, a |
| 471 |
< |
Deferred Task structure is provided in the ether_data area to call IODone from |
| 472 |
< |
EtherInterrupt() when the packet write is complete (see above for a description |
| 473 |
< |
of the mechanism). |
| 467 |
> |
For situations in which access to raw Ethernet packets is not possible, |
| 468 |
> |
Basilisk II implements a special "tunneling" mode in which it sends and |
| 469 |
> |
receives packets via UDP, using BSD socket functions. It simply wraps the |
| 470 |
> |
Ethernet packets into UDP packets, using dummy Ethernet addresses that are |
| 471 |
> |
made up of the IP address of the host. Ethernet broadcast and AppleTalk |
| 472 |
> |
multicast packets are sent to the IP broadcast address. Because of this |
| 473 |
> |
non-standard way of tunneling, it is only possible to set up a "virtual" |
| 474 |
> |
network amongst machines running Basilisk II in this way. |
| 475 |
> |
|
| 476 |
> |
Writing packets works as in the serial drivers. The ether_write() routine |
| 477 |
> |
may choose to send the packet immediately (e.g. under BeOS) and return noErr |
| 478 |
> |
or to delegate the sending to a separate thread (e.g. under AmigaOS) and |
| 479 |
> |
return "1" to indicate that the operation is still in progress. For the |
| 480 |
> |
latter case, a Deferred Task structure is provided in the ether_data area to |
| 481 |
> |
call IODone from EtherInterrupt() when the packet write is complete (see |
| 482 |
> |
above for a description of the mechanism). |
| 483 |
|
|
| 484 |
|
Packet reception is a different story. First of all, there are two methods |
| 485 |
< |
provided by the MacOS Ethernet driver API to read packets, one of which (ERead/ |
| 486 |
< |
ERdCancel) is not supported by Basilisk II. Basilisk II only supports reading |
| 487 |
< |
packets by attaching protocol handlers. This shouldn't be a problem because |
| 488 |
< |
the only network code I've seen so far that uses ERead is some Apple sample |
| 489 |
< |
code. AppleTalk, MacTCP, MacIPX, OpenTransport etc. all use protocol handlers. |
| 490 |
< |
By attaching a protocol handler, the user of the Ethernet driver supplies a |
| 491 |
< |
handler routine that should be called by the driver upon reception of Ethernet |
| 492 |
< |
packets of a certain type. 802.2 packets (type/length field of 0..1500 in the |
| 493 |
< |
packet header) are a bit special: there can be only one protocol handler attached |
| 494 |
< |
for 802.2 packets (by specifying a packet type of "0"). The MacOS LAP Manager |
| 495 |
< |
will attach a 802.2 handler upon startup and handle the distribution of 802.2 |
| 496 |
< |
packets to sub-protocol handlers, but the Basilisk II Ethernet driver is not |
| 497 |
< |
concerned with this. |
| 485 |
> |
provided by the MacOS Ethernet driver API to read packets, one of which |
| 486 |
> |
(ERead/ ERdCancel) is not supported by Basilisk II. Basilisk II only |
| 487 |
> |
supports reading packets by attaching protocol handlers. This shouldn't be a |
| 488 |
> |
problem because the only network code I've seen so far that uses ERead is |
| 489 |
> |
some Apple sample code. AppleTalk, MacTCP, MacIPX, OpenTransport etc. all |
| 490 |
> |
use protocol handlers. By attaching a protocol handler, the user of the |
| 491 |
> |
Ethernet driver supplies a handler routine that should be called by the |
| 492 |
> |
driver upon reception of Ethernet packets of a certain type. 802.2 packets |
| 493 |
> |
(type/length field of 0..1500 in the packet header) are a bit special: there |
| 494 |
> |
can be only one protocol handler attached for 802.2 packets (by specifying a |
| 495 |
> |
packet type of "0"). The MacOS LAP Manager will attach a 802.2 handler upon |
| 496 |
> |
startup and handle the distribution of 802.2 packets to sub-protocol |
| 497 |
> |
handlers, but the Basilisk II Ethernet driver is not concerned with this. |
| 498 |
|
|
| 499 |
|
When the driver receives a packet, it has to look up the protocol handler |
| 500 |
|
installed for the respective packet type (if any has been installed at all) |
| 501 |
< |
and call the packet handler routine. This must be done with Execute68k() from |
| 502 |
< |
the MacOS thread, so an interrupt (INTFLAG_ETHER) is triggered upon reception |
| 503 |
< |
of a packet so the EtherInterrupt() routine can call the protocol handler. |
| 504 |
< |
Before calling the handler, the Ethernet packet header has to be copied to |
| 505 |
< |
MacOS RAM (the "ed_RHA" field of the ether_data structure is provided for this). |
| 506 |
< |
The protocol handler will read the packet data by means of the ReadPacket/ReadRest |
| 507 |
< |
routines supplied by the Ethernet driver. Both routines will eventually end up |
| 508 |
< |
in EtherReadPacket() which copies the data to Mac address space. EtherReadPacket() |
| 509 |
< |
requires the host address and length of the packet to be loaded to a0 and d1 |
| 510 |
< |
before calling the protocol handler. |
| 501 |
> |
and call the packet handler routine. This must be done with Execute68k() |
| 502 |
> |
from the MacOS thread, so an interrupt (INTFLAG_ETHER) is triggered upon |
| 503 |
> |
reception of a packet so the EtherInterrupt() routine can call the protocol |
| 504 |
> |
handler. Before calling the handler, the Ethernet packet header has to be |
| 505 |
> |
copied to MacOS RAM (the "ed_RHA" field of the ether_data structure is |
| 506 |
> |
provided for this). The protocol handler will read the packet data by means |
| 507 |
> |
of the ReadPacket/ReadRest routines supplied by the Ethernet driver. Both |
| 508 |
> |
routines will eventually end up in EtherReadPacket() which copies the data |
| 509 |
> |
to Mac address space. EtherReadPacket() requires the host address and length |
| 510 |
> |
of the packet to be loaded to a0 and d1 before calling the protocol handler. |
| 511 |
|
|
| 512 |
< |
Does this sound complicated? You are probably right. Here is another description |
| 513 |
< |
of what happens upon reception of a packet: |
| 512 |
> |
Does this sound complicated? You are probably right. Here is another |
| 513 |
> |
description of what happens upon reception of a packet: |
| 514 |
|
1. Ethernet card receives packet and notifies some platform-dependant entity |
| 515 |
|
inside Basilisk II |
| 516 |
|
2. This entity will store the packet in some safe place and trigger the |
| 530 |
|
part of the packet data to Mac RAM using the pointer and length which are |
| 531 |
|
still in a0/d1 |
| 532 |
|
|
| 533 |
< |
For a more detailed description of the Ethernet driver, see "Inside AppleTalk". |
| 533 |
> |
For a more detailed description of the Ethernet driver, see the book "Inside |
| 534 |
> |
AppleTalk". |
| 535 |
|
|
| 536 |
|
6.13. System-dependant device access |
| 537 |
|
------------------------------------ |
| 545 |
|
6.14. User interface strings |
| 546 |
|
---------------------------- |
| 547 |
|
|
| 548 |
< |
To aid in localization, all user interface strings of Basilisk II are collected |
| 549 |
< |
in "user_strings.cpp" (for common strings) and "user_strings_*.cpp" (for |
| 550 |
< |
platform-specific strings), and accessed via the GetString() function. This |
| 551 |
< |
way, Basilisk II may be easily translated to different languages. |
| 548 |
> |
To aid in localization, all user interface strings of Basilisk II are |
| 549 |
> |
collected in "user_strings.cpp" (for common strings) and |
| 550 |
> |
"user_strings_*.cpp" (for platform-specific strings), and accessed via the |
| 551 |
> |
GetString() function. This way, Basilisk II may be easily translated to |
| 552 |
> |
different languages. |
| 553 |
|
|
| 554 |
|
6.15. Preferences management |
| 555 |
|
---------------------------- |
| 558 |
|
Preferences items are accessed with the PrefsAdd*(), PrefsReplace*() and |
| 559 |
|
PrefsFind*() functions and stored in human-readable and editable text files |
| 560 |
|
on disk. There are two lists of available preferences items. The first one, |
| 561 |
< |
common_prefs_items, defines the items which are available on all systems. |
| 562 |
< |
The second one, platform_prefs_items, is defined in prefs_*.cpp and lists |
| 563 |
< |
the prefs items which are specific to a certain platform. |
| 561 |
> |
common_prefs_items, is defined in "prefs_items.cpp" and lists items which |
| 562 |
> |
are available on all systems. The second one, platform_prefs_items, is |
| 563 |
> |
defined in "prefs_*.cpp" and lists the prefs items which are specific to a |
| 564 |
> |
certain platform. |
| 565 |
|
|
| 566 |
|
The "prefs_editor_*.cpp" module provides a graphical user interface for |
| 567 |
|
setting the preferences so users won't have to edit the preferences file |
| 570 |
|
7. Porting Basilisk II |
| 571 |
|
---------------------- |
| 572 |
|
|
| 573 |
< |
Porting Basilisk II to a new platform should not be hard. These are the steps |
| 574 |
< |
involved in the process: |
| 573 |
> |
Porting Basilisk II to a new platform should not be hard. These are the |
| 574 |
> |
steps involved in the process: |
| 575 |
|
|
| 576 |
|
1. Create a new directory inside the "src" directory for your platform. If |
| 577 |
|
your platform comes in several "flavours" that require adapted files, you |
