| 1 |
|
|
| 2 |
< |
Basilisk II, Version 0.7 |
| 2 |
> |
Basilisk II, Version 0.8 |
| 3 |
|
A free, portable Mac II emulator |
| 4 |
|
|
| 5 |
|
Copyright (C) 1997-1999 Christian Bauer et al. |
| 35 |
|
- Floppy disk driver (only 1.44MB disks supported) |
| 36 |
|
- Driver for HFS partitions and hardfiles |
| 37 |
|
- CD-ROM driver with basic audio functions |
| 38 |
+ |
- Easy file exchange with the host OS via a "Host Directory Tree" icon |
| 39 |
+ |
on the Mac desktop |
| 40 |
|
- Ethernet driver |
| 41 |
|
- Serial drivers |
| 42 |
|
- SCSI Manager (old-style) emulation |
| 139 |
|
installed CD-ROM drives. The format of the "CD-ROM drive description" |
| 140 |
|
is the same as that of "disk" lines. |
| 141 |
|
|
| 142 |
+ |
extfs <direcory path> |
| 143 |
+ |
|
| 144 |
+ |
This item specifies the root directory for the "Host Directory Tree" |
| 145 |
+ |
file system (the "Unix/BeOS/Amiga/..." icon on the Finder desktop). |
| 146 |
+ |
All objects contained in that directory are accessible by Mac applications. |
| 147 |
+ |
This feature is only available when File System Manager V1.2 or later |
| 148 |
+ |
is installed on the Mac side. FSM 1.2 is built-in beginning with MacOS 7.6 |
| 149 |
+ |
and can be installed as a system extension (downloadable from Apple, look |
| 150 |
+ |
for the FSM SDK in the developer section) for earlier MacOS versions. |
| 151 |
+ |
|
| 152 |
|
scsi0 <SCSI target> ... scsi6 <SCSI target> |
| 153 |
|
|
| 154 |
|
These items describe the SCSI target to be used for a given Mac SCSI |
| 210 |
|
(8/15/24 bit) depends on the depth of the underlying X11 screen. |
| 211 |
|
This is the default. |
| 212 |
|
dga/<width>/<height> |
| 213 |
< |
Full-screen display using the X11 DGA extensions. The color depth |
| 213 |
> |
[if Basilisk II was configured with --enable-xf86-dga] |
| 214 |
> |
Full-screen display using the XFree86 DGA extension. The color depth |
| 215 |
|
(8/15/24 bit) depends on the depth of the underlying X11 screen. |
| 216 |
|
"width" and "height" specify the maximum width/height to use. |
| 217 |
< |
Saying "dga/0/0" means "complete screen". For DGA to work, Basilisk II |
| 218 |
< |
must be compiled with DGA support enabled (selectable in the configure |
| 219 |
< |
script). |
| 217 |
> |
Saying "dga/0/0" means "complete screen". |
| 218 |
> |
dga/<frame buffer name> |
| 219 |
> |
[if Basilisk II was configured with --enable-fbdev-dga] |
| 220 |
> |
Full-screen display using the frame buffer device /dev/fb. The color |
| 221 |
> |
depth (8/15/24 bit) depends on the depth of the underlying X11 screen. |
| 222 |
> |
The "frame buffer name" is looked up in the "fbdevices" file (whose |
| 223 |
> |
path can be specified with the "fbdevicefile" prefs item) to determine |
| 224 |
> |
certain characteristics of the device (doing a "ls -l /dev/fb" should |
| 225 |
> |
tell you what your frame buffer name is). |
| 226 |
|
|
| 227 |
|
AmigaOS: |
| 228 |
|
The "video mode" is one of the following: |
| 332 |
|
Linux: |
| 333 |
|
The "ethernet card description" is the name of an Ethernet interface. |
| 334 |
|
There are two approaches to networking with Basilisk II: |
| 335 |
+ |
|
| 336 |
|
1. Direct access to an Ethernet card via the "sheep_net" driver. |
| 337 |
|
In this case, the "ethernet card description" must be the name |
| 338 |
|
of a real Ethernet card, e.g. "eth0". It also requires the "sheep_net" |
| 342 |
|
networking. MacOS will only be able to talk to other machines on |
| 343 |
|
the Ethernet, but not to other networks that your Linux box routes |
| 344 |
|
(e.g. a second Ethernet or a PPP connection to the Internet). |
| 345 |
+ |
|
| 346 |
|
2. Putting Basilisk II on a virtual Ethernet via the "ethertap" device. |
| 347 |
|
In this case, the "ethernet card description" must be the name |
| 348 |
|
of an ethertap interface, e.g. "tap0". It also requires that you |
| 349 |
|
configure your kernel to enable routing and the ethertap device: |
| 350 |
|
under "Networking options", enable "Kernel/User netlink socket" and |
| 351 |
|
"Netlink device emulation", under "Network device support", activate |
| 352 |
< |
"Ethertap network tap". Next, see /usr/src/linux/Documentation/ |
| 353 |
< |
networking/ethertap.txt for information on how to set up /dev/tap* |
| 354 |
< |
device nodes and activate the ethertap interface. Under MacOS, |
| 355 |
< |
select an IP address that is on the virtual network and set the |
| 356 |
< |
default gateway to the IP address of the ethertap interface. This |
| 357 |
< |
approach will let you access all networks that your Linux box has |
| 358 |
< |
access to (especially, if your Linux box has a dial-up Internet |
| 359 |
< |
connection and is configured for IP masquerading, you can access |
| 360 |
< |
the Internet from MacOS). The drawback is that you can only use |
| 361 |
< |
network protocols that Linux can route, so you have to install and |
| 362 |
< |
configure netatalk if you want to use AppleTalk. |
| 352 |
> |
"Ethertap network tap". You also have to modify devices/net/ethertap.c |
| 353 |
> |
a bit before compiling the new kernel: |
| 354 |
> |
|
| 355 |
> |
- insert "#define CONFIG_ETHERTAP_MC 1" near the top (after the |
| 356 |
> |
#include lines) |
| 357 |
> |
- comment out the line "dev->flags|=IFF_NOARP;" in ethertap_probe() |
| 358 |
> |
|
| 359 |
> |
Next, see /usr/src/linux/Documentation/networking/ethertap.txt for |
| 360 |
> |
information on how to set up /dev/tap* device nodes and activate the |
| 361 |
> |
ethertap interface. Under MacOS, select an IP address that is on the |
| 362 |
> |
virtual network and set the default gateway to the IP address of the |
| 363 |
> |
ethertap interface. This approach will let you access all networks |
| 364 |
> |
that your Linux box has access to (especially, if your Linux box has |
| 365 |
> |
a dial-up Internet connection and is configured for IP masquerading, |
| 366 |
> |
you can access the Internet from MacOS). The drawback is that you |
| 367 |
> |
can only use network protocols that Linux can route, so you have to |
| 368 |
> |
install and configure netatalk if you want to use AppleTalk. Here is |
| 369 |
> |
an example /etc/atalk/atalkd.conf for a LAN: |
| 370 |
> |
|
| 371 |
> |
eth0 -seed -phase 2 -net 1 -addr 1.47 -zone "Ethernet" |
| 372 |
> |
tap0 -seed -phase 2 -net 2 -addr 2.47 -zone "Basilisknet" |
| 373 |
> |
|
| 374 |
> |
(the "47" is an arbitrary node number). This will set up a zone |
| 375 |
> |
"Ethernet" (net 1) for the Ethernet and a zone "Basilisknet" (net 2) |
| 376 |
> |
for the internal network connection of the ethertap interface. |
| 377 |
> |
MacOS should automatically recognize the nets and zones upon startup. |
| 378 |
> |
If you are in an existing AppleTalk network, you should contact |
| 379 |
> |
your network administrator about the nets and zones you can use |
| 380 |
> |
(instead of the ones given in the example above). |
| 381 |
|
|
| 382 |
|
AmigaOS: |
| 383 |
|
You have to specify the name of the SANA-II Ethernet device and the device |
| 453 |
|
Unix: |
| 454 |
|
|
| 455 |
|
keycodes <"true" or "false"> |
| 456 |
< |
keycodefile <Keycode file path> |
| 456 |
> |
keycodefile <keycodes file path> |
| 457 |
|
|
| 458 |
|
By default, the X11 event handler in Basilisk II uses KeySyms to |
| 459 |
|
translate keyboard event to Mac keycodes. While this method is very |
| 464 |
|
not on the selected keymap. Unfortunately it depends on the X server |
| 465 |
|
being used and possibly also on the type of keyboard attached. So |
| 466 |
|
Basilisk II needs a table to translate X keycodes to Mac keycodes. |
| 467 |
< |
This table is read by default from /usr/local/lib/basilisk_ii_keycodes |
| 467 |
> |
This table is read by default from /usr/local/share/BasiliskII/keycodes |
| 468 |
|
unless you specify a different file with the "keycodefile" item. |
| 469 |
< |
A sample keycode file ("basilisk_ii_keycodes") is included with |
| 470 |
< |
Basilisk II. |
| 469 |
> |
A sample keycode file is included with Basilisk II. |
| 470 |
> |
|
| 471 |
> |
fbdevicefile <fbdevices file path> |
| 472 |
> |
|
| 473 |
> |
This option specifies the file that contains frame buffer device |
| 474 |
> |
specifications for the fbdev-DGA video mode (when Basilisk II was |
| 475 |
> |
configured with --enable-fbdev-dga). The default location of the file |
| 476 |
> |
is /usr/local/share/BasiliskII/fbdevices. A sample file is included |
| 477 |
> |
with Basilisk II. |
| 478 |
|
|
| 479 |
|
AmigaOS: |
| 480 |
|
|
| 653 |
|
- Bill Huey <billh@mag.ucsd.edu>: 15/16 bit DGA and 15/16/32 bit X11 |
| 654 |
|
window support |
| 655 |
|
- David Lawrence <davidl@jlab.org>: incremental window refresh code |
| 656 |
+ |
- Samuel Lander <blair_sp@hotmail.com>: tile-based window refresh code |
| 657 |
+ |
- Gwenole Beauchesne <gb@dial.oleane.com>: SPARC assembly optimizations and |
| 658 |
+ |
fbdev video code |
| 659 |
+ |
- and others... |
| 660 |
|
|
| 661 |
|
Special thanks to: |
| 662 |
|
- Bernd Schmidt for letting me use his UAE 68k emulation |
