| 1 |
|
|
| 2 |
< |
Basilisk II, Version 0.8 |
| 3 |
< |
A free, portable Mac II emulator |
| 2 |
> |
Basilisk II |
| 3 |
> |
A 68k Macintosh emulator |
| 4 |
|
|
| 5 |
< |
Copyright (C) 1997-2000 Christian Bauer et al. |
| 6 |
< |
Freely distributable |
| 5 |
> |
Copyright (C) 1997-2002 Christian Bauer et al. |
| 6 |
|
|
| 7 |
|
|
| 8 |
|
License |
| 15 |
|
Overview |
| 16 |
|
-------- |
| 17 |
|
|
| 18 |
< |
Basilisk II is a free, portable, Open Source 68k Mac emulator. It requires |
| 19 |
< |
a copy of a Mac ROM and a copy of MacOS to run. Basilisk II is freeware and |
| 20 |
< |
distributed under the GNU General Public License. |
| 18 |
> |
Basilisk II is an Open Source 68k Macintosh emulator. That is, it enables |
| 19 |
> |
you to run 68k MacOS software on you computer, even if you are using a |
| 20 |
> |
different operating system. However, you still need a copy of MacOS and |
| 21 |
> |
a Macintosh ROM image to use Basilisk II. |
| 22 |
|
|
| 23 |
|
Basilisk II has currently been ported to the following systems: |
| 24 |
|
- BeOS R4 (PowerPC and x86) |
| 25 |
< |
- Unix (tested under Linux, Solaris 2.5, FreeBSD 3.x, NetBSD 1.4.2 and |
| 25 |
> |
- Unix (tested under Linux, Solaris 2.x, FreeBSD 3.x, NetBSD 1.4.x and |
| 26 |
|
IRIX 6.5) |
| 27 |
|
- AmigaOS 3.x |
| 28 |
|
- Windows NT 4.0 (mostly works under Windows 95/98, too) |
| 29 |
+ |
- Mac OS X 10.1 |
| 30 |
|
|
| 31 |
|
Some features of Basilisk II: |
| 32 |
|
- Emulates either a Mac Classic (which runs MacOS 0.x thru 7.5) |
| 69 |
|
BeOS: |
| 70 |
|
/boot/home/config/settings/BasiliskII_prefs |
| 71 |
|
|
| 72 |
< |
Unix: |
| 72 |
> |
Unix, Mac OS X: |
| 73 |
|
~/.basilisk_ii_prefs |
| 74 |
|
|
| 75 |
|
AmigaOS: |
| 95 |
|
This item describes one MacOS volume to be mounted by Basilisk II. |
| 96 |
|
There can be multiple "disk" lines in the preferences file. Basilisk II |
| 97 |
|
can handle hardfiles (byte-per-byte images of HFS volumes in a file on |
| 98 |
< |
the host system) as well as HFS partitions on hard disks etc. (but Basilisk |
| 99 |
< |
II doesn't know about MacOS partition tables; it relies on the host OS to |
| 100 |
< |
handle this). The "volume description" is either the pathname of a hardfile |
| 101 |
< |
or a platform-dependant description of an HFS partition or drive. If the |
| 102 |
< |
volume description starts with an asterisk ("*"), the volume is write |
| 103 |
< |
protected for MacOS (and the "*" is discarded). |
| 98 |
> |
the host system), HFS partitions on hard disks etc., and MacOS-partitioned |
| 99 |
> |
disks (it can only access the first partition, though). The "volume |
| 100 |
> |
description" is either the pathname of a hardfile or a platform-dependant |
| 101 |
> |
description of an HFS partition or drive. If the volume description is |
| 102 |
> |
prefixed by an asterisk ("*"), the volume is write protected for MacOS. |
| 103 |
> |
|
| 104 |
> |
Basilisk II can also handle some types of Mac "disk image" files directly, |
| 105 |
> |
as long as they are uncompressed and unencoded. |
| 106 |
|
|
| 107 |
|
BeOS: |
| 108 |
|
To specify an HFS partition, simply specify its path (e.g. |
| 109 |
< |
"/dev/disk/scsi/0/1/0/0_3"). If you don't specify any volume, Basilisk II |
| 109 |
> |
"/dev/disk/scsi/0/1/0/0_3"). If you don't specify any volumes, Basilisk II |
| 110 |
|
will search for and use all available HFS partitions. |
| 111 |
|
|
| 112 |
|
Unix: |
| 113 |
< |
To specify an HFS partition, simply specify its path (e.g. |
| 114 |
< |
"/dev/sda5"). |
| 113 |
> |
To specify an HFS partition, simply specify its path (e.g. "/dev/sda5"). |
| 114 |
> |
If you want to access a MacOS-partitioned hard disk or removable volume |
| 115 |
> |
(Jaz, Zip etc.) and your operating system doesn't understand MacOS |
| 116 |
> |
partition tables, you can specify the block device name (e.g. "/dev/sda") |
| 117 |
> |
to access the first HFS partition on the device. Under Linux, if you |
| 118 |
> |
don't specify any volumes, Basilisk II will search /etc/fstab for |
| 119 |
> |
unmounted HFS partitions and use these. |
| 120 |
|
|
| 121 |
|
AmigaOS: |
| 122 |
|
Partitions/drives are specified in the following format: |
| 154 |
|
This item specifies the root directory for the "Host Directory Tree" |
| 155 |
|
file system (the "Unix/BeOS/Amiga/..." icon on the Finder desktop). |
| 156 |
|
All objects contained in that directory are accessible by Mac applications. |
| 157 |
+ |
|
| 158 |
|
This feature is only available when File System Manager V1.2 or later |
| 159 |
|
is installed on the Mac side. FSM 1.2 is built-in beginning with MacOS 7.6 |
| 160 |
|
and can be installed as a system extension (downloadable from Apple, look |
| 194 |
|
|
| 195 |
|
screen <video mode> |
| 196 |
|
|
| 197 |
< |
This item describes the type of video display to be used by Basilisk II. |
| 198 |
< |
If you are using a Mac Classic ROM, the display is always 1-bit 512x342 |
| 199 |
< |
and this item is ignored. The format of the "video mode" is platform |
| 200 |
< |
specific. |
| 197 |
> |
This item describes the type of video display to be used by default for |
| 198 |
> |
Basilisk II. If you are using a Mac Classic ROM, the display is always |
| 199 |
> |
1-bit 512x342 and this item is ignored. The format of the "video mode" is |
| 200 |
> |
platform specific. |
| 201 |
|
|
| 202 |
|
BeOS: |
| 203 |
|
The "video mode" is one of the following: |
| 217 |
|
Unix: |
| 218 |
|
The "video mode" is one of the following: |
| 219 |
|
win/<width>/<height> |
| 220 |
< |
Color display in an X11 window of the given size. The color depth |
| 221 |
< |
(8/15/24 bit) depends on the depth of the underlying X11 screen. |
| 222 |
< |
This is the default. |
| 220 |
> |
Color display in an X11 window of the given size. There are several |
| 221 |
> |
resolutions and color depths available. The set of color depths |
| 222 |
> |
depends on the capabilities of the X11 server, the operating system, |
| 223 |
> |
and Basilisk II compile-time options, but 1 bit and the default depth |
| 224 |
> |
of the X11 screen should always be available. |
| 225 |
|
dga/<width>/<height> |
| 226 |
|
[if Basilisk II was configured with --enable-xf86-dga] |
| 227 |
|
Full-screen display using the XFree86 DGA extension. The color depth |
| 285 |
|
application via Alt-Tab, Basilisk II is put in "snooze" mode (i.e. MacOS |
| 286 |
|
is frozen). |
| 287 |
|
|
| 288 |
+ |
Mac OS X: |
| 289 |
+ |
The "video mode" is one of the following: |
| 290 |
+ |
win/<width>/<height> |
| 291 |
+ |
win/<width>/<height>/<bits per pixel> |
| 292 |
+ |
A refreshed (and buffered) [and very slow] Quartz window. |
| 293 |
+ |
The default <bits> is 32, which is the only depth currently supported. |
| 294 |
+ |
full/<width>/<height> |
| 295 |
+ |
full/<width>/<height>/<bits per pixel> |
| 296 |
+ |
A CGDirectDisplay full screen mode. <bits> can currently be 8, 16 or 32. |
| 297 |
+ |
If not specified, the default is 32. There is currently no way to switch |
| 298 |
+ |
between the Mac OS X and Basilisk II display, but Apple-Option-Escape |
| 299 |
+ |
instantly and safely terminates the Basilisk II program. |
| 300 |
+ |
opengl/<width>/<height> |
| 301 |
+ |
opengl/<width>/<height>/<bits per pixel> |
| 302 |
+ |
Currently unimplemented, will be a fast windowed mode. |
| 303 |
+ |
|
| 304 |
|
seriala <serial port description> |
| 305 |
|
|
| 306 |
|
This item describes the serial port to be used as Port A (Modem Port) |
| 351 |
|
is not available and this setting is ignored. The "ethernet card description" |
| 352 |
|
is a platform-dependant description of an ethernet card. |
| 353 |
|
|
| 354 |
+ |
General note: To use TCP/IP from MacOS, you should assign a different IP |
| 355 |
+ |
address to the MacOS (entered into the MacOS TCP/IP (or MacTCP) control |
| 356 |
+ |
panel). Otherwise there will be confusion about which operating system will |
| 357 |
+ |
handle incoming packets. |
| 358 |
+ |
|
| 359 |
|
BeOS: |
| 360 |
|
It doesn't matter what you give as "ethernet card description", Basilisk II |
| 361 |
|
will always use the first Ethernet card it finds as long an an "ether" |
| 362 |
< |
line exists (e.g. say "ether yes"). As Basilisk II requires the sheep_net |
| 363 |
< |
net server add-on from SheepShaver, you can only use Ethernet on PowerPC |
| 364 |
< |
machines. |
| 362 |
> |
line exists (e.g. say "ether yes"). Using Ethernet requires the "sheep_net" |
| 363 |
> |
Net Server add-on to be installed. The first time you start Basilisk II |
| 364 |
> |
with Ethernet enabled you will be asked whether it's OK to make the |
| 365 |
> |
necessary changes to your BeOS network configuration to enable sheep_net. |
| 366 |
|
|
| 367 |
|
Linux: |
| 368 |
|
The "ethernet card description" is the name of an Ethernet interface. |
| 369 |
|
There are two approaches to networking with Basilisk II: |
| 370 |
|
|
| 371 |
< |
1. Direct access to an Ethernet card via the "sheep_net" driver. |
| 372 |
< |
In this case, the "ethernet card description" must be the name |
| 373 |
< |
of a real Ethernet card, e.g. "eth0". It also requires the "sheep_net" |
| 374 |
< |
driver to be installed and accessible. This approach will allow you |
| 375 |
< |
to run all networking protocols under MacOS (TCP/IP, AppleTalk, IPX |
| 376 |
< |
etc.) but there is no connection between Linux networking and MacOS |
| 377 |
< |
networking. MacOS will only be able to talk to other machines on |
| 378 |
< |
the Ethernet, but not to other networks that your Linux box routes |
| 379 |
< |
(e.g. a second Ethernet or a PPP connection to the Internet). |
| 371 |
> |
1. Direct access to an Ethernet card via the "sheep_net" kernel module. |
| 372 |
> |
The "ethernet card description" must be the name of a real Ethernet |
| 373 |
> |
card, e.g. "eth0". |
| 374 |
> |
|
| 375 |
> |
The sheep_net module is included in the Basilisk II source |
| 376 |
> |
distribution in the directory "src/Unix/Linux/NetDriver". You have |
| 377 |
> |
to compile and install the module yourself: |
| 378 |
> |
|
| 379 |
> |
$ su |
| 380 |
> |
[enter root password] |
| 381 |
> |
# make |
| 382 |
> |
# make dev |
| 383 |
> |
[this will create a /dev/sheep_net device node; you should give |
| 384 |
> |
appropriate access rights to the user(s) running Basilisk II] |
| 385 |
> |
# insmod sheep_net.o |
| 386 |
> |
|
| 387 |
> |
If you copy the sheep_net.o module to a place where it can be found |
| 388 |
> |
by the kernel module loader ("/lib/modules/<version>/kernel/drivers/net" |
| 389 |
> |
for 2.4 kernels) and add the line |
| 390 |
> |
|
| 391 |
> |
alias char-major-10-198 sheep_net |
| 392 |
> |
|
| 393 |
> |
to "/etc/modules.conf", the kernel should be able to load the module |
| 394 |
> |
automatically when Basilisk II is started. |
| 395 |
> |
|
| 396 |
> |
The sheep_net module will allow you to run all networking protocols |
| 397 |
> |
under MacOS (TCP/IP, AppleTalk, IPX etc.) but there is no connection |
| 398 |
> |
between Linux networking and MacOS networking. MacOS will only be |
| 399 |
> |
able to talk to other machines on the Ethernet, but not to other |
| 400 |
> |
networks that your Linux box routes (e.g. a second Ethernet or a PPP |
| 401 |
> |
connection to the Internet). |
| 402 |
|
|
| 403 |
|
2. Putting Basilisk II on a virtual Ethernet via the "ethertap" device. |
| 404 |
|
In this case, the "ethernet card description" must be the name |
| 405 |
|
of an ethertap interface, e.g. "tap0". It also requires that you |
| 406 |
< |
configure your kernel to enable routing and the ethertap device: |
| 406 |
> |
configure your kernel to enable routing and ethertap support: |
| 407 |
|
under "Networking options", enable "Kernel/User netlink socket" and |
| 408 |
|
"Netlink device emulation", under "Network device support", activate |
| 409 |
< |
"Ethertap network tap". You also have to modify devices/net/ethertap.c |
| 409 |
> |
"Ethertap network tap". You also have to modify drivers/net/ethertap.c |
| 410 |
|
a bit before compiling the new kernel: |
| 411 |
|
|
| 412 |
|
- insert "#define CONFIG_ETHERTAP_MC 1" near the top (after the |
| 436 |
|
your network administrator about the nets and zones you can use |
| 437 |
|
(instead of the ones given in the example above). |
| 438 |
|
|
| 439 |
+ |
FreeBSD: |
| 440 |
+ |
The "ethertap" method described above also works under FreeBSD, but since |
| 441 |
+ |
no-one has found the time to write a section for this manual, you're on |
| 442 |
+ |
your own here... |
| 443 |
+ |
|
| 444 |
|
AmigaOS: |
| 445 |
|
You have to specify the name of the SANA-II Ethernet device and the device |
| 446 |
|
unit as "<device name>/<unit>" (e.g. "ariadne.device/0"). If the given |
| 448 |
|
not an Ethernet device, Basilisk II will display a warning message and |
| 449 |
|
disable Ethernet networking. |
| 450 |
|
|
| 451 |
+ |
See the next item for an alternative way to do networking with Basilisk II. |
| 452 |
+ |
|
| 453 |
+ |
udptunnel <"true" or "false"> |
| 454 |
+ |
|
| 455 |
+ |
Setting this to "true" enables a special network mode in which all network |
| 456 |
+ |
packets sent by MacOS are tunnelled over UDP using the host operating |
| 457 |
+ |
system's native TCP/IP stack. This can only be used to connect computers |
| 458 |
+ |
running Basilisk II (and not, for example, for connecting to the Internet |
| 459 |
+ |
or an AppleShare server running on a real Mac), but it is probably the |
| 460 |
+ |
easiest way to set up a network between two instances of Basilisk II |
| 461 |
+ |
because the UDP tunnelling doesn't require any special kernel modules or |
| 462 |
+ |
network add-ons. It relies on IP broadcasting, however, so its range is |
| 463 |
+ |
limited. It should be fine though for doing a little file sharing or |
| 464 |
+ |
playing Spectre. |
| 465 |
+ |
|
| 466 |
+ |
udpport <IP port number> |
| 467 |
+ |
|
| 468 |
+ |
This item specifies the IP port number to use for the "UDP Tunnel" mode. |
| 469 |
+ |
The default is 6066. |
| 470 |
+ |
|
| 471 |
|
rom <ROM file path> |
| 472 |
|
|
| 473 |
|
This item specifies the file name of the Mac ROM file to be used by |
| 502 |
|
|
| 503 |
|
modelid <MacOS model ID> |
| 504 |
|
|
| 505 |
< |
Specifies the Model ID that Basilisk II should report to MacOS. |
| 506 |
< |
The default is "5" which corresponds to a Mac IIci. If you want to |
| 507 |
< |
run MacOS 8, you have to set this to "14" (Quadra 900). Other values |
| 508 |
< |
are not officially supported and may result in crashes. MacOS versions |
| 509 |
< |
earlier than 7.5 may only run with the Model ID set to "5". If you are |
| 510 |
< |
using a Mac Classic ROM, the model is always "Mac Classic" and this |
| 511 |
< |
setting is ignored. |
| 505 |
> |
Specifies the Macintosh model ID that Basilisk II should report to MacOS. |
| 506 |
> |
The default is "5" which corresponds to a Mac IIci. If you want to run |
| 507 |
> |
MacOS 8, you have to set this to "14" (Quadra 900). Other values are not |
| 508 |
> |
officially supported and may result in crashes. MacOS versions earlier |
| 509 |
> |
than 7.5 may only run with the Model ID set to "5". If you are using a Mac |
| 510 |
> |
Classic ROM, the model is always "Mac Classic" and this setting is |
| 511 |
> |
ignored. |
| 512 |
|
|
| 513 |
|
nosound <"true" or "false"> |
| 514 |
|
|
| 572 |
|
the number of key events sent to MacOS for each wheel movement (the |
| 573 |
|
number of lines to scroll). |
| 574 |
|
|
| 575 |
+ |
ignoresegv <"true" or "false"> |
| 576 |
+ |
|
| 577 |
+ |
Set this to "true" to ignore illegal memory accesses. The default |
| 578 |
+ |
is "false". This feature is only implemented on the following |
| 579 |
+ |
platforms: Linux/x86, Linux/ppc, Darwin/ppc. |
| 580 |
+ |
|
| 581 |
+ |
dsp <device name> |
| 582 |
+ |
mixer <device name> |
| 583 |
+ |
|
| 584 |
+ |
Under Linux and FreeBSD, this specifies the devices to be used for sound |
| 585 |
+ |
output and volume control, respectively. The defaults are "/dev/dsp" and |
| 586 |
+ |
"/dev/mixer". |
| 587 |
+ |
|
| 588 |
|
AmigaOS: |
| 589 |
|
|
| 590 |
|
sound <sound output description> |
| 595 |
|
|
| 596 |
|
ahi/<hexadecimal mode ID> |
| 597 |
|
|
| 598 |
+ |
scsimemtype <type> |
| 599 |
+ |
|
| 600 |
+ |
This item controls the type of memory to use for SCSI buffers. Possible |
| 601 |
+ |
values are: |
| 602 |
+ |
0 Chip memory |
| 603 |
+ |
1 24-bit DMA capable memory |
| 604 |
+ |
2 Any memory |
| 605 |
+ |
|
| 606 |
+ |
Be warned that many SCSI host adapters will not work with the "Any memory" |
| 607 |
+ |
setting. Basilisk II has no way of knowing which memory type is supported |
| 608 |
+ |
by the host adapter and setting an unsupported type will result in data |
| 609 |
+ |
corruption. |
| 610 |
+ |
|
| 611 |
|
Windows: |
| 612 |
|
|
| 613 |
|
noscsi <"true" or "false"> |
| 618 |
|
means is that the control is not returned to the application until the |
| 619 |
|
command is completely finished. Normally this is not an issue, but when a |
| 620 |
|
CDR/CDRW is closed or erased the burner program typically wants to wait in |
| 621 |
< |
some progress dialog The result may be that the application reports a |
| 621 |
> |
some progress dialog the result may be that the application reports a |
| 622 |
|
time-out error, but the operation completes all right anyway. |
| 623 |
|
|
| 624 |
|
nofloppyboot <"true" or "false"> |
| 632 |
|
This is very useful since many devices have almost identical ATAPI and SCSI |
| 633 |
|
versions of their hardware, and MacOS applications usually support the SCSI |
| 634 |
|
version only. The example below is typical: |
| 635 |
< |
|
| 635 |
> |
|
| 636 |
|
replacescsi "HP" "CD-Writer+ 7100" "PHILIPS" "CDD3600" |
| 637 |
< |
|
| 637 |
> |
|
| 638 |
|
Note the use of quotes. |
| 639 |
|
|
| 640 |
|
rightmouse <0/1> |
| 659 |
|
and some other need it to be turned off. Consult the documentation |
| 660 |
|
of your CD software to learn which one is optimal for you. |
| 661 |
|
|
| 662 |
< |
framesleepticks <milliseconds> |
| 662 |
> |
framesleepticks <milliseconds> |
| 663 |
|
|
| 664 |
|
The amount of time between video frames. |
| 665 |
|
|
| 669 |
|
|
| 670 |
|
stickymenu <true/false> |
| 671 |
|
|
| 672 |
< |
If true, the main menu bar is kept open even after the mouse button is released, |
| 673 |
< |
under all OS versions (OS 8 has this feature already). There are extensions to do |
| 674 |
< |
the same thing, but it's faster to handle this in native code. |
| 675 |
< |
Default is "true". |
| 672 |
> |
If true, the main menu bar is kept open even after the mouse button is |
| 673 |
> |
released, under all OS versions (OS 8 has this feature already). There |
| 674 |
> |
are extensions to do the same thing, but it's faster to handle this in |
| 675 |
> |
native code. Default is "true". |
| 676 |
|
|
| 677 |
|
ntdx5hack <"true" or "false"> |
| 678 |
|
|
| 679 |
< |
You may need this on NT if your display adapter driver has a bug in DirectX |
| 680 |
< |
palette support. Black and white are reversed. It fixes the palette issue |
| 681 |
< |
by using GDI palette instead of D3D palette. Default is false. |
| 679 |
> |
You may need this on NT if your display adapter driver has a bug in |
| 680 |
> |
DirectX palette support. Black and white are reversed. It fixes the |
| 681 |
> |
palette issue by using GDI palette instead of D3D palette. Default is |
| 682 |
> |
false. |
| 683 |
|
|
| 684 |
|
|
| 685 |
|
Usage |
| 704 |
|
On PC-style keyboards, "Alt" is the Mac "Command" key, while the "Windows" |
| 705 |
|
key is the Mac "Option" key. |
| 706 |
|
|
| 707 |
+ |
Mouse: |
| 708 |
+ |
Under Unix, pressing Ctrl-F5 while the Basilisk II window is active will |
| 709 |
+ |
grab the mouse. This is needed for compatibility with some MacOS programs, |
| 710 |
+ |
especially games such as flight simulators. Press Ctrl-F5 again to return |
| 711 |
+ |
to normal mouse operation. |
| 712 |
+ |
|
| 713 |
|
Floppy: |
| 714 |
|
Basilisk II can only handle 1.44MB MFM floppies. Depending on your platform, |
| 715 |
< |
flopyy disk changes might not be detected automatically. Under Linux, press |
| 715 |
> |
floppy disk changes might not be detected automatically. Under Unix, press |
| 716 |
|
Ctrl-F1 to mount a floppy. Under BeOS, select the appropriate "Mount" menu |
| 717 |
|
item or press Ctrl-F1 to mount a floppy. Under Windows, press Ctrl-Shift-F11. |
| 718 |
|
|
| 719 |
|
HFS partitions: |
| 720 |
|
Having HFS partitions mounted for read-write access under Basilisk II while |
| 721 |
|
they are also mounted on the host OS will most likely result in volume |
| 722 |
< |
corruption and data losses. Unmount your HFS volumes before starting |
| 722 |
> |
corruption and data loss. Unmount your HFS volumes before starting |
| 723 |
|
Basilisk II. |
| 724 |
|
|
| 725 |
|
ZIP drives: |
| 738 |
|
ROM. Also, the video display is fixed to 512x342 in monochrome. The AmigaOS |
| 739 |
|
and BeOS/PPC versions of Basilisk II cannot do Mac Classic emulation. |
| 740 |
|
|
| 741 |
+ |
Video resolution switching: |
| 742 |
+ |
Run-time switching of video resolutions requires the Display Manager. This |
| 743 |
+ |
is included in MacOS versions 7.6 and above, and available as a system |
| 744 |
+ |
extension for earlier MacOS versions as a free download from ftp.apple.com |
| 745 |
+ |
(look for "Display Software 2.x"). Click on "Options..." in the "Monitors" |
| 746 |
+ |
control panel to select the resolution. |
| 747 |
+ |
|
| 748 |
|
Sound output: |
| 749 |
|
Sound output under Basilisk II requires Sound Manager 3.0 or later. This |
| 750 |
< |
is included starting with MacOS 7.5 and available as a system extension |
| 751 |
< |
for earlier MacOS versions. Sample rate, bit resolution and mono/stereo |
| 752 |
< |
can be selected in the Sound control panel (section "Sound Out"). |
| 750 |
> |
is included in MacOS versions 7.5 and above, and available as a system |
| 751 |
> |
extension for earlier MacOS versions as a free download from ftp.apple.com. |
| 752 |
> |
Sample rate, bit resolution and mono/stereo can be selected in the Sound |
| 753 |
> |
control panel (section "Sound Out"). |
| 754 |
|
|
| 755 |
|
Ethernet: |
| 756 |
|
Basilisk II supports all Ethernet protocols. Running a protocol under |
| 757 |
|
Basilisk II that already runs within the host operating system on the same |
| 758 |
|
network card (e.g. running MacTCP under Basilisk II on a BeOS machine) may |
| 759 |
|
or may not work (generally, it should work, but some specific things like |
| 760 |
< |
"ping" may not). If you have problems with FTP, try setting your FTP client |
| 760 |
> |
"ping" may not). If you have problems with FTP, try setting the FTP client |
| 761 |
|
to passive mode. |
| 762 |
|
|
| 763 |
|
LocalTalk: |
| 767 |
|
|
| 768 |
|
Serial: |
| 769 |
|
You can use the serial ports in Basilisk II to connect to the Internet |
| 770 |
< |
with a modem and "MacPPP". |
| 770 |
> |
with a modem and the "MacPPP" or "Open Transport/PPP" software. |
| 771 |
|
|
| 772 |
|
|
| 773 |
|
Technical Documentation |
| 779 |
|
Acknowledgements |
| 780 |
|
---------------- |
| 781 |
|
|
| 782 |
< |
Contributions by: |
| 662 |
< |
- Bernd Schmidt <crux@pool.informatik.rwth-aachen.de>: UAE 68k emulation |
| 663 |
< |
- Marc Hellwig <Marc.Hellwig@uni-mainz.de>: audio output, BeOS video code |
| 664 |
< |
and networking |
| 665 |
< |
- Lauri Pesonen <lpesonen@nic.fi>: Windows NT port |
| 782 |
> |
Contributions by (in alphabetical order): |
| 783 |
|
- Orlando Bassotto <future@powercube.mediabit.net>: FreeBSD support |
| 784 |
< |
- Brian J. Johnson <bjohnson@sgi.com>: IRIX support |
| 784 |
> |
- Gwenolé Beauchesne <gb@dial.oleane.com>: SPARC assembly optimizations, |
| 785 |
> |
lots of work on the Unix video code |
| 786 |
|
- Marc Chabanas <Marc.Chabanas@france.sun.com>: Solaris sound support |
| 787 |
+ |
- Marc Hellwig <Marc.Hellwig@uni-mainz.de>: audio output, BeOS video code |
| 788 |
+ |
and networking |
| 789 |
|
- Bill Huey <billh@mag.ucsd.edu>: 15/16 bit DGA and 15/16/32 bit X11 |
| 790 |
|
window support |
| 791 |
< |
- David Lawrence <davidl@jlab.org>: incremental window refresh code |
| 791 |
> |
- Brian J. Johnson <bjohnson@sgi.com>: IRIX support |
| 792 |
> |
- Jürgen Lachmann <juergen_lachmann@t-online.de>: AmigaOS CyberGraphX support |
| 793 |
|
- Samuel Lander <blair_sp@hotmail.com>: tile-based window refresh code |
| 794 |
< |
- Gwenole Beauchesne <gb@dial.oleane.com>: SPARC assembly optimizations and |
| 795 |
< |
fbdev video code |
| 794 |
> |
- David Lawrence <davidl@jlab.org>: incremental window refresh code |
| 795 |
> |
- Nigel Pearson <nigel@ind.tansu.com.au>: Mac OS X port |
| 796 |
> |
- Lauri Pesonen <lpesonen@nic.fi>: Windows NT port |
| 797 |
> |
- Bernd Schmidt <crux@pool.informatik.rwth-aachen.de>: UAE 68k emulation |
| 798 |
|
- and others... |
| 799 |
|
|
| 800 |
|
Special thanks to: |
| 812 |
|
<Christian.Bauer@uni-mainz.de> |
| 813 |
|
for inclusion in the next release of Basilisk II. |
| 814 |
|
|
| 815 |
+ |
If you don't have a fix, you should post a bug report using the Source Forge |
| 816 |
+ |
bug tracker, supplying as much information as possible (operating system and |
| 817 |
+ |
versions of Basilisk II and MacOS being used, relevant hardware information, |
| 818 |
+ |
the exact steps to reproduce the bug, etc.): |
| 819 |
+ |
http://sourceforge.net/tracker/?group_id=2123&atid=102123 |
| 820 |
+ |
|
| 821 |
+ |
I also strongly suggest reading this before posting a bug report: |
| 822 |
+ |
http://www.chiark.greenend.org.uk/~sgtatham/bugs.html |
| 823 |
+ |
|
| 824 |
|
|
| 825 |
|
Author |
| 826 |
|
------ |
| 827 |
|
|
| 828 |
< |
You can contact me at <Christian.Bauer@uni-mainz.de>. Don't send bug |
| 829 |
< |
reports, send fixes. Ports to other platforms are also very welcome. |
| 830 |
< |
Please contact me before you intend to make major changes to the source. |
| 831 |
< |
You might be working on something that I have already done or I may have |
| 832 |
< |
different ideas about the Right Way to do it. |
| 833 |
< |
|
| 834 |
< |
Questions about ROM files will not be answered. There is also no point in |
| 835 |
< |
sending me questions etc. that are specific to the Windows port of |
| 836 |
< |
Basilisk II. I don't have Windows and can't say anything about that. |
| 837 |
< |
Ask Lauri Pesonen instead. |
| 828 |
> |
You can contact me at <Christian.Bauer@uni-mainz.de>, but please don't do |
| 829 |
> |
so unless absolutely necessary. I'm maintaining Basilisk II in my spare |
| 830 |
> |
time and am not able to provide technical support for everyone. If you have |
| 831 |
> |
questions, consider posting them to one of the support forums mentioned |
| 832 |
> |
below. |
| 833 |
> |
|
| 834 |
> |
You are encouraged to contact me personally when |
| 835 |
> |
- you have bug fixes or small enhancements for the code |
| 836 |
> |
- you want to port Basilisk II to another platform |
| 837 |
> |
- you want to discuss technical issues |
| 838 |
> |
- you intend to make major changes to the source; you might be working on |
| 839 |
> |
something that I have already done, or I may have different ideas about |
| 840 |
> |
the Right Way to do it |
| 841 |
> |
|
| 842 |
> |
There is no point in sending me questions about |
| 843 |
> |
- ROM files and how/where to get them |
| 844 |
> |
- versions of Basilisk II that run on operating systems other than Unix, |
| 845 |
> |
BeOS and AmigaOS. If you are using any other operating system, there's |
| 846 |
> |
no point in asking me how to to X or why Y doesn't work because I won't |
| 847 |
> |
know either. Instead, you should look in the "Acknowledgements" section |
| 848 |
> |
of this manual to find the person responsible. For example, if your |
| 849 |
> |
question is specific to the Windows operating system, ask Lauri Pesonen. |
| 850 |
> |
I don't have Windows and can't answer your questions and I'm too lazy to |
| 851 |
> |
forward mail to Lauri myself. In any case, it would probably be better |
| 852 |
> |
to post your questions to a public forum as it will get a much wider |
| 853 |
> |
audience there. |
| 854 |
|
|
| 855 |
|
|
| 856 |
|
Support |
| 859 |
|
The official Basilisk II home page is at |
| 860 |
|
http://www.uni-mainz.de/~bauec002/B2Main.html |
| 861 |
|
|
| 862 |
< |
There is no user-level support for Basilisk II at the moment. |
| 862 |
> |
The Basilisk II project page on SourceForge is at |
| 863 |
> |
http://sourceforge.net/projects/basilisk/ |
| 864 |
> |
|
| 865 |
> |
If you have problems, you may want to visit the Basilisk II forums: |
| 866 |
> |
http://sourceforge.net/forum/?group_id=2123 |
| 867 |
> |
|
| 868 |
> |
There is also a mailing list for Basilisk II users: |
| 869 |
> |
http://lists.sourceforge.net/lists/listinfo/basilisk-user |
| 870 |
> |
|
| 871 |
> |
And another mailing list for Basilisk II developers: |
| 872 |
> |
http://lists.sourceforge.net/lists/listinfo/basilisk-devel |
| 873 |
> |
|
| 874 |
> |
Some general advice about asking technical support questions can be found at |
| 875 |
> |
http://www.tuxedo.org/~esr/faqs/smart-questions.html |
| 876 |
> |
|
| 877 |
> |
Keeping this in mind will greatly increase your chances of getting a useful |
| 878 |
> |
answer. |
| 879 |
|
|
| 880 |
|
|
| 881 |
|
History |
